Everything works perfectly at the range semi auto and frt ran good. Took gun home cleaned never took FCG apart. Put the vector back together and semi auto doesn't work at all can't pull trigger back far enough to disengage this sear. Frt mode still seems to work correctly. So thought that maybe the safety cam was the issue so installed the brello cam and still not working. I have the dogwood frt installed. nothing looks to be broken everything looks correct. Any thoughts for a solution?

Blown away at how fast this thing runs. That's a full 30, in not alot of time. Hats off to duality, at least for the mamba. I haven't had one malfunction in 500 rounds. Haven't had to pull the trigger in a special way either. It just runs. Burst or full send. I can barely stop it from running if I try. (Tightly clamping with the bottom of the finger, in my case, is not reliable at accomplishing single shots)

For 100 less dollars, and not a single alteration to the FCG besides swapping in the mamba, I dont think it can be beat for those who want a highly reliable and easy to use FRT for the vector. At least until there is a 3 pos that is truly drop in for all cases. (Which I am starting to assume may not be possible at this point?)

About a year ago I used to have a gen 2 vector CRB. I ended up selling it because I just felt the vector shines with a pistol or sbr configuration. Long story short I've saved some gun money and can't decide whether to get the g2 pistol or g3 pistol in .45.

My real concern is the mounting for the g3 pistol grip, I've heard of them breaking due to them being polymer with a metal mounting piece and I wanted to hear about others experiences with the g3.

My only concern with the g2 is the parts availability long term. I actually prefer the look and feel of the g2 but an outside perspective would definitely help. I'm aware the g2 is cheaper but money isn't my concern.

Can anyone provide precise measurements for the hinge mount on the Gen 1 vector? Over all size and the dimensions of each segment of the hinge. Inner and outer diameter, etc. Any info would be helpful.

Nobody has what I want so I'm just gonna make one for my Gen 2.

I'm considering getting a 9mm Gen 3 Vector in black.

However I live in California which means that I will have to run a featureless setup. I don't want to run a fingrip, instead I would like to run a Thordsen stock. Does anyone have any experience with this, and/or knows the feasibility of this?

Getting ahead of some comments: No I don't want to move out of state and no I don't want to commit a felony.

Hey gang,

Just giving you a heads up to not waste your money like i did on any Strike Industries products especially the dual folding pistol brace.

It broke within 2 folds within 1 minute of installing it. It's a terrible design and they used junk soft metal on top of the bar design. The metal is so soft that it sheers with no effort on the only portion of metal that keeps your brace locked on the folding position. It's so soft that you can shave the metal off with a knife if that gives you any idea.

I have talked to Strike Industries many times and they are unwilling to replace the defective part and instead offered a replacement part for $140. The brace was $180 so it wasn't cheap.

I couldn't find many reviews on this brace before I bought it so I wanted to put the warning out to stay away from the brace and the company. They don't stand behind their products and could care less on helping the customer. Just take a look at their Google reviews and complaints.

Until I have money for Tisha or Delta Tek and UH1 for maximum drip, this the set up.

Ive been looking around and held a few in stores but does anyone have a preference or feedback or either?

vector 9mm 2.1 with frt

10mm kriss vector gen3 SBR, with FRT trigger.

If i were to buy the Mamba FRT for my Gen 3 SDP, am i able to throw a 3 position cam in it at a later date and make it 3 position or are the Mamba and RATLR completely different seats?

If any one is thinking about getting a vector frt drop the money and get the duality arms frt

It’s a 10mm. It was a Lipseys exclusive but thankfully the CA ones were in stock for a while. I’m actually looking for ideas on fore grips and other upgrades. There’s rumors about fixed mag being an option soon for glock mags so I don’t care about the “No vertical grip” rule. Thank you for the input!

They are only for the range to have some fun nothing crazy. I’m currently back ordered on the kv extended mag so just looking for something inexpensive to grab for a couple days at the range

I know the SilencerCo Osprey would be perfect but I can’t justify paying more for the suppressor than I paid for the gun