I currently EDC Bersa’s Thunder 9 UC Pro in an Alien Gear Cloak 3.5 IWB holster. Absolutely love this holster. Extreamly comfortable.

I recently got the TPR9C and want to work that into my EDC. However Alien Gear doesn’t make a holster for the TPR9C. They still make one for the UC Pro. Even though the TPR9C has been the current model for over a decade. Makes no sense.

Anyway, I’m trying to find an IWB holster for my new TPR9C. Hybrid kydex and neoprene (like alien gear) or leather. I checked Vedder and they don’t either. But again they make one for the UC Pro.

Anyone have any thoughts on where to look?

Please judge me on the design, not on my craftsmanship. I have limited tools available. So far, it's working well.

Pins: https://www.amazon.com/dp/B0CTMT38L5?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1

Aluminum sheet: https://www.amazon.com/dp/B0C33D6VK1?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1

Grip tape: https://www.amazon.com/dp/B0CKGJWH69?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1

Although they look almost identical, I know that doesn’t mean much with guns… what level of parts compatibility with the Thunder and parts availability in general does the 383 and 383A have ? I want a Bersa, but I want a steel frame.

Also… how difficult is it to detail strip for refinishing ?

Got the Firestorm today. Disappointed that the magazine has to be gently inserted and even then 9/10 it fails to seat. Any suggestions?

I have the full size tpr9. I got the pistol for a heck of a deal but need a threaded barrel, what are the options?

My .380 Thunder has L32015 stamped into the back of the slide and also on the frame forward above the trigger guard.
Is this my serial number?

Just finished upgrading my Bersa BP9FS. Installed a B-Sight red dot and added an Olight weapon light.

I was looking through the manual and did not find that 9mm was rated for +P ammo. Anyone know for sure if it is.

Haven’t shot my thunder .380 in years and just noticed what appears to be a chipped barrel after a recent trip to the range.

Do I need a new barrel? Can a new barrel be had for less than what the gun costs?

Recently purchased, will be cleaning it but havent found any decent IWB holsters, any recommendations?

It’s here!

Bersa Thunder 32

Added the green rubber grips. Can’t wait to take her to the range!

I just learned about it last week and I shoulda jumped immediately. Want one but can't seem to find stock at any of the online retailers.

Can anyone help? Thanks

So does anyone else have any major issues with their BP40CC? Ive had this thing for like 2 years now, and its one of my dream guns, I'd like to own most of the discontinued Bersa products, and the BP40 is included in that, I finally got a hold of one and its been just so unreliable, its got a little rust on it now but I got it brand new unsold and it was completely rust free, I kinda just forgot about it and let it rust, anyways, the rust has nothing to do with it, its been unreliable since before. The part that gets me, is its pretty reliable when I load no more than 2 in the magazine, but even then sometimes it malfunctions but waaaay less. Fully loaded mags? Forget it, you wont fire one bullet from this thing without some type of malfunction. Just wondering if maybe anyone else has had issues or maybe im using the wrong ammo?

Ive used SUBsonic HPs, Hornady FMJ, flat nose, +P, Small tipped HPs, all kinds of ammo and same issue.

Just got this for $750 bucks at my favorite pawn shop. Love the guys at Hawk Armory.

Guy who traded it in said it kept jamming and it wasn't very accurate, traded it in for a much higher priced gun im sure.

Im good friends with the owner and his son and we sat and chatted about it for a while and he said what probably happened is Bersa is still kind of ( sadly ) a small gun company in North America, and especially in the south so maybe he was using bad ammo or was "LiMp WRistiNG" it ( i don't believe thats a thing ) or whatever and it jammed once and he got out of it as quickly as he could. Im happy with it. Me and my best friend shot it, and we both hit an old toilet multiple times at roughly 80 yards with it, we only shot it 10 times cause we dont have much 9mm ammo, but I mean so far it feels great. It's a bit hard to take apart and put back together but after figuring out a few tricks its not that bad, really, and I love the way it looks. I might get a Bersa 1911 after this, either all black or FDE, or mirror finish, we'll have to see. Only got into those style of firearms though cause of Bersa huge fan of them and CZ.

I'm very happy with it, will definitely make a video or two of me shooting this bad boy. Gobbless

Evenin’ all. I currently EDC a Beretta 1934 (I have large pockets 🫣)… I acquired a new production Walther PP (wanted a DA/SA pistol) start of the year and immediately got rid of it… the gun wasn’t thoroughly finish-machined, and Walther wouldn’t fix it. Recoil wasn’t bad.

I love my baby Beretta, but have the itch for a DA/SA pistol again. Is the CC noticeably smaller than the Thunder ? For anyone who knows, how do they compare in size to the Beretta ‘34 ?

Was curious about compatibility. First 2011, so was wondering if the mag compatibility is the same with staccato and whatnot, and if mag extentions for those would fit the mecgar mags. So far, I have an egw kit in, and a dawson tooless guide rod on the way. Also, was curious on what triggers would fit, since some are grio specific like the cheely and whatnot

Howdy fellow uncommon gun enjoyers, I just picked up a TPR9XT to run in USPSA Production and am having the damnedest time finding holsters for it. Does anyone know of any holster companies that make lefty kydex holsters? Or any compatibility with other similar platforms? Ghost Hydra P with a Beretta shell almost fits but the trigger guard is too wide.

Looking for more mags at the moment