Just hit 90 k on my 2016 frs today , the oil change is due at 90.5 k just wanna ask if there is anything else i should be looking forward to get changed or get service other than oil change using 0w-20 btw ! Thanks for help

All this from a goddamn sneezing fit in traffic

Hey everyone,

I hated the cheap factory silver plastic trim, so I covered it using a $30 roll of black Alcantara wrap.

I made a short before and after showcase video so you can see the final results: Best $30 Mod For Your BRZ, FR-S, or 86

It took about two hours but it was easily the best $30 I've spent on the interior. Let me know what you think!

Hey guys, just curious on if anyone else has dealt with this, I’m 24 with a pretty cooked back, I had s1, l5 and l4 bulging disks in the past that were doing fine until a few weeks ago when I bought an 86, I’d been looking at them forever and they’re one of my dream cars so I’m pretty upset that it seems to be making my back pain come back, I also don’t know if I’ve just hurt it at the gym and the car is exacerbating it or not, I’m 188cm/6’2.

https://imgur.com/a/8PNBctQ

‼️Coilovers arent on yet, those are just the wheels I put on‼️

Back with another question, appreciate all the help on my last post about the Tein Flex Z's... I noticed this morning looking at my wheels that I have a slight bit of camber in the back, so it got me wondering about how much that'll exaggerate after lowering the car. For reference I am lowering on the Flex Z's, and I also got Whiteline adjustable End Links for the front and rear. Bottom line is I wanna know what Rear Lower Control Arms I should get (if I even need to), I don't want to spend a billion dollars, just want a set so I can adjust my rear camber to a slightly negative/near OEM degree. Currently just thinking about getting either MeganRacing or maXspeeding rods ones. The maxpeeding are cheap but like I said I just need one that'll get the job done. Not looking to stance or anything CLOSE to that lol. What you guys think?

Hello! I recently bought a 2015 FRS and did circles in a parking lot to get a feel of when the car would start sliding. Never hit a slide however. I am learning how to control the car.

After the matter, for about a week, 30% of the time I turn the car on it just dies. Sometimes the ignition will come on, with half crank, but with a full crank to start it dies and it doesn’t start.

The only fix I found was wiggling the positive clamp on the battery and wiggling the whole battery. Then the car starts fine. The car has not died mid drive.

My guess is that the existing battery (that’s apparently a Walmart battery) is super corroded as seen on the pics.

Please let me know if y’all had similar stuff and I should do, thank you a lot!

Everyone told me to get the 225/45. I'm sorry.

205/45 is how this car was meant to be driven. It's how Kiichiro Toyoda would have wanted it to be driven. It's how Tetsuya mothafuking Tada wanted it to be driven. And it's how freaking Takumi Fujiwara would have wanted it to be driven—if he had the GT.

Holy tail-happy, fishtailing, traction-allergic 86. The car is 10X more fun.

It's so much more responsive. You flick it left or right and it changes direction faster than the UK changes prime ministers.The difference is so obvious, I could feel it from the very first twist of the wheel. I spent the entire drive grinning.

It's a lot more eager and feels much lighter.

I was worried that having less grip was going to get me on the line with my insurer, but boy, the car was grounded and playful at the same time. Just perfect.

You will definitely feel the speed bumps more, but who the fuck buys this car for comfort?

I have a 2020 86, in first and second gear I sometimes hear a humming from the rear during slow speed turns in parking lots. Anyone know a possible cause? Thanks

Long shot and most likely not, but is there a shop that specializes in 86s specifically the very vast Houston area?

I already have a mechanic and if there is any problems, I just give him the parts and he does it at a fair rate but am looking for idk something more, maybe a someone who knows how to optimize these cars? Idk, what's out there?

Hey everyone!

Just wanted to share some my experiences up to hitting 150k miles today on my 2013 BRZ

Long story short, the car has been incredibly reliable (knock on wood). It did have a major service within the past month, and that’s resealing the timing chain cover. Thanks to the help of AutoTuned in Monrovia, CA (incredible shop for 86’s in Southern California) they took care of the job plus tackled a bunch of “while we’re there” items such as the water pump, thermostat, serpentine belt, coolant hoses and plastic fittings, and a few more small related items. This all started when I was noticing oil coming from the bottom of the cover dropping onto the skid plate and the headers (which would smell after longer drives). There was barely any noticeable difference on the dipstick between oil changes.

Besides that, that’s the only major thing to report besides being on top of oil changes (3-3.5k) and all other fluids/maintenance items like PCV valve and some aging suspension components. This car sees 20-25k miles a year. This is a really late model 2013, so there’s no valve spring recall associated with the vehicle after checking the vin on numerous occasions.

I don't seem to find a video or tutorial of how to fit a TRD lip anywhere. Sounds stupid but there are screw holes on the back of the foglight which there nowhere to be found on the bumper.

If you can find me a clip or video of how to install the lip is much appreciated thank you!

Hey yall, I was looking into putting on the gk tech v3 kit I already have but have been seeing alot of ppl add extended inner tie rods. At that rate I almost wanna extend the flca and or get the offset rack spacers, and rack limiter/ knuckle stoppers.

But at that rate if im about to dedicate time and money into changing all that shit around I almost wanna do the Rack relocation and just call it a day.

My problem with that is I dont entirely have the resources or know how to make it all happen just yet so id rather not start cutting shit until ive either practiced or am accompanied by someone with enough previous experience.

Wondering if anyone has any info or insight on how to achieve a sort of happy medium. I make more of a headache out of it then it really is lol. Has anyone ever just driven on extended flca and longer tie rods woth no offset spacers or rsck relocation? What can I play with while avoiding serious trouble as far as the front end goes, if possible id like to avoid any cutting but if that means I won't get as much angle then its okay, as long as im not dogging my shit and ruining it.

I also may not have done the best job at giving all the Info I have to talk abt this so if you have any questions like I will. Would love to talk and learn more! Thx

Anyone play this game anymore?

Recently took my 2017 86 to the shop and they mentioned my back wheel bearings are pretty worn, is this price standard for a job like this? Im not really knowledgeable with this issue

Background: 2022 BRZ sat for 2 years. Recently did a full rebuild using a factory Subaru short block (new everything else under the hood too). About 80 miles on it since the rebuild. Tank still had old 2-year-old gas in it when I started driving (topped off with fresh gas on top rather than draining).

Symptom: Knocking noise from the engine bay, but only under a specific condition — 4th gear, low speed, "bogged down" (lugging) and getting into the throttle around 4k RPM. It's inconsistent — happens sometimes, not every time under the same-feeling condition.

What doesn't trigger it:

• 1st-3rd gear pulls to redline are completely clean, no noise at all
• Only shows up specifically in that lugging-in-a-tall-gear scenario

Other details:

• Using the car for DoorDash, so lots of stop-and-go city driving, shifts running ~7 hours continuous
• Seemed worse toward the end of long shifts / after dark (though could be heat soak + tank getting toward the old-gas dregs rather than actual temperature)
• High humidity when it's happened
• Dipstick is clean — no metal flake
• Oil smells a bit like fuel, but I drive a Mini daily and get the same smell there since they upped the ethanol content in local gas — so assuming this is normal and not diagnostic
• No check engine light / haven't pulled codes yet

My working theory: stale gas (2 years old, diluted rather than drained) lowering effective octane, showing up specifically under classic lugging conditions (low RPM + high load = hardest test for octane), made worse by heat soak on long shifts and/or running the bottom of the tank where the oldest fuel sits.

What I'm doing about it:

• Draining/running down the old gas rather than continuing to dilute
• Running premium (91/93) going forward
• Avoiding lugging in 4th, downshifting before getting into the throttle at low RPM

Questions for the sub:

1. Does this pattern (clean at redline in lower gears, knock only when lugging in a tall gear, inconsistent) sound like classic detonation to you, or does it point somewhere else given this is a fresh rebuild?
2. Anyone dealt with knock like this after a long sit + old gas specifically on the FA24/FA20?
3. Worth pulling codes/knock sensor data before assuming it's just fuel, or is this a pretty textbook stale-gas-lugging case?

Appreciate any input — trying to figure out if this is a "flush the gas and move on" situation or if I should get it scanned before putting more delivery miles on it.

So, my car 2015 Scion frs overheated yesterday seen steam coming out noticed my coolant was low, and if I’m not mistaken should be blue ( also want to know what yall recommend) after noticed I got white/ blue stains splattered everywhere I did some testing did a coolant pressure test 16psi couldn’t see or hear anything took it for spin while I was driving it was slowly warming up, but when I parked and blasted my a/c fan on Max i noticed it quickly started getting more hot so I went and look and noticed well 1 of radiator fans was on while the other wasn’t, and also I noticed that appears to me that under the throttle body there’s 2 hoses not sure what for, but it appears out of that area there was something leaking/spraying? Need ur guys help and opinion before I bring to shop?

I've been looking online for UEL headers and my biggest concern is if cheaper options could sound tinny and raspy?

How drastic is the difference between a more expensive header like tomei compared to those cheaper brands?

Thanks in advance!

Good day to all…

Both my fog lights are out. I’m contemplating replacing them with some diode dynamics fog lights for more output. Has anyone done this? Opinions? If you went another way, what’d you go with and how pleased were you with the outcome? Thanks

I have a 2013 brz and am trying to bleed the brakes, can I use dot 4 when cap says dot 3 and if so is it fine to just top it up instead of flushing out the old fluid?

Don’t sleep on this drop-in arm rest from Alibaba / Temu. Makes a huge difference