r/ScrapMetal • u/No_ThatGuy3 • 1d ago
r/ScrapMetal • u/worthing0101 • Mar 05 '26
READ BEFORE POSTING OR COMMENTING
Welcome to r/scrapmetal !
Please read this entire post!
First and foremost, before you post or comment please take a few minutes to read the rules on the sidebar. If you break the rules you may be banned, possibly permanently. Every subreddit has a list of rules so please don't act like you've never seen rules anywhere on Reddit before. Be a good member of the community and read and follow the rules. (There are only 6 of them. It's not difficult.)
Second, are you looking to buy or sell materials from other redditors or advertise your business? THAT IS NOT ALLOWED HERE - DO IT SOMEWHERE ELSE. Can't find an appropriate subreddit for it? START YOUR OWN SUBREDDIT DEDICATED TO IT. I'll even link that subreddit here if you do. (Why don't we allow those kinds of posts or comments here? Because if we did the subreddit would be overrun by those kinds of posts in no time.)
Update: 04/30/2026
Two updates!
I've heard your feedback and it's clear that for a number of different reasons y'all value the ability to call people thieves and drug addicts so rule 7 has been removed. Thanks for your feedback an for keeping that feedback mostly constructive.
That being said I am asking y'all to PLEASE report the posts and comments from people who are obviously seriously talking about stealing or breaking the law. This is FAR more important and useful to stopping those people than just mocking them in comments. Again, when you report posts/comments it goes into a queue for mods to review because it is impossible to stay on top of every comment in every thread.
First, I've added a new rule to the sub:
Rule 7 - No referring to people as thieves or drug users or addicts of any kind. This includes all slang for thieves or drug users or addicts of any kind. This includes both direct and indirect references as well as questions. Don't ask people if/where they stole stuff. Don't tell people their scrap is worth some amount of drugs. Don't joke about it. Don't troll people about it. If someone says or suggests they stole something then report their post or their comment.
I'm adding this rule because accusing people of stealing and/or referring to them as drug users serves no useful purpose. No one, literally no one, is going to see the light because someone on Reddit calls them out on stealing. If people admit to or suggest they've stolen something then report their post or comment and let the mods deal with it. Don't be the person who lacks the self control to start name calling and runs afould of rule #1 and receives a ban.
Though it's strongly implied I also want to directly state that this rule does NOT mean we condone stealing in any way here. Rule #4 is still absolutely still in effect.
Second, I've updated rule #4 as well to make sure our stance on talking about stealing in this subreddit is more clear. The new text is:
Rule 4 - No promoting or bragging about breaking the law/stealing while scrapping. This includes suggesting people knowingly break the law or asking for help on doing something that is breaking the law. This also includes people joking about it, posting rage bait or claiming satire. If you to practice your comedy there are other subreddits for that.
Questions? Ask them here or in Mod Mail.
Update: 03/15/2026
Note: The contents below were from a previous post from roughly 03/15 that I am adding here for future reference.
Recently there was a post in r/scrapmetal that contained several instances of doxing or sharing personal information without consent and I want to talk about it.
I am referring to the post where someone shared images of their ticket from a recent scrap run. In one of those images their personal information, printed on the ticket, was clearly visible to anyone who saw the image. I am sure this was an accident. I am sure they didn't intend to share their info or realize they had done so.
In the same post several people made comments that contained OP's full name which they had undoubtedly learned from the image that OP posted. These comments were not accidents and they were made intentionally. (Someone looked at OPs image, saw their name then made a comment and used OP's name.) Thanks to them there's the real chance that OPs full name has been indexed by some search engine, archiving, service, etc.
Let me be as clear as fucking possible here:
Sharing someone's personal information without their consent isn't OK. Doing so will get you banned from this subreddit and possibly from all of Reddit. Whether or not someone has shared their own information is irrelevant and doesn't give anyone else permission to re-share that information. Full stop.
I'll be adding this to the subreddit rules and if it happens again there will be bans. This isn't up for debate. I don't care if you disagree or why you disagree or the logic behind your disagreement. This is how it is and if that bothers you so much then you can unsub right now.
Any questions? Send them to mod mail.
r/ScrapMetal • u/gneisslab • 4h ago
Scrap Photo 💸 Selling scrap Aly and brass in London for the first time - advice needed.
Hey all, got about 60kg in brass and 120kg in aluminium.
All of it is machinable grade. What sort of price can I expect per kg?
Also most places are saying they will take it away to weigh at their yard and make payment later. Is this normal? Concerned that they will underweigh or simply not make payment.
Cheers!
r/ScrapMetal • u/Sea-Gate-6511 • 5h ago
What do you reckon I should do?
Should I take apart and get out all the copper? Anything else? The box is metal but presumably nearly worthless. Should I open up each fuse? The last one I had was ancient. All I got out was the bus bar and the cables. Binned the rest
r/ScrapMetal • u/User_OU812 • 3h ago
I'm going to scrap a 2000 Chevrolet Blazer.
What is the best way to maximize the pay out? Should I scrap the converter separate? Should I scrap the aluminum wheels separate or should I just send it because separating everything just isn't worth it. I'm new to this.
r/ScrapMetal • u/zeepzopzoopitybop • 21h ago
Scrap Photo 💸 $962 in the pocket from last Friday
Did 3 trips to the yard on Friday and walked away with a 962$…cant complain about free money
r/ScrapMetal • u/Elroyy_ • 1d ago
Scrap Photo 💸 One lucky bloke walked out with $10.5k today
r/ScrapMetal • u/saltywaysofme • 19h ago
Question 💫 Different grades of aluminum
I know the basics. Sheet, extruded and cast aluminum. I'm just not sure about some of it. Any help identifying what's in the pictures would be appreciated.
r/ScrapMetal • u/Horror-Phrase730 • 19h ago
Question 💫 Return on stripper
Hey all I have a ton of copper wire mainly stranded 10ga-24ga couple 1/0 2/0 runs real copper not CCA and TONS of cat 5E-6 cable I don’t have a ton of free time so I’m not looking to process any of the wire but
1. is it worth the $250-$350 to pickup this stripper? Currently I have about a 55gal drum of real wire and more daily
2. Is the category cable worth even messing with? or just throw it on top with the stripped wire and get what I get
r/ScrapMetal • u/GinoValenti • 1d ago
Scrap Photo 💸 Boys, I hit a lick! Oh wait.
This is the heat exchanger bundle in abandoned air handler up in the penthouse of one our buildings. Unfortunately,it is very thin bendable carbon steel tubes. It’s not a completely dry hole, however. There were a couple 1/2” L soft tubing drain lines, and there is a couple hundred feet of abandoned 1/4” and 3/8” copper pneumatic control lines.
r/ScrapMetal • u/Repulsive-Brush1081 • 18h ago
What’s the scrap value per pound of this wire? 250kcmil aluminum mv cable. With copper semi conductor
r/ScrapMetal • u/coltd89 • 1d ago
My ballast collection so far this year
I do commercial maintenance/service and collect my ballasts each year for a little bonus. Last year when I cashed in I got .10/lb for electronic and .15/lb for magnetic and .25/lb for transformers. I normally get between $400-$700. It’s not much but it’s something and I just like seeing how many I can accrue.
r/ScrapMetal • u/Proof_Bathroom_3902 • 19h ago
Took in aluminum- left with less money than I came in with
Aluminum cans @ 68 cents a pound and I had about 100 pounds.
Then I asked if they had any lead. They had a bunch of soft lead flashing and drain pipe.
Instead of taking home 68 bucks I took home 208 pounds of soft lead and paid them another 140 bucks.
r/ScrapMetal • u/Alive-Sam • 11h ago
Need lithium and lead acid scrap sellers
Hey everyone
I am a buyer of all type of battery scrap in bulk
If anyone is selling that material or had any reference feel free to reach me
PS. I’m also into battery manufacturing and into the business of fresh lithium cells of A Quality
r/ScrapMetal • u/bigfatpump • 22h ago
Question 💫 Scraping 400ft of 4/0 welding lead?
I recently purchased a welder generator, and the older gentleman who sold me it threw in 400ft of 4/0 welding lead for 1500 dollars. I run 2/0 leads because it is enough for what I do and I can run long distances with it.
4/0 is heavy, bulky and more than enough for what I need. It would go on my truck but it's just too much to handle. The 4/0 is pure copper. How much would I get out of it?
r/ScrapMetal • u/Organic-Mulberry1085 • 1d ago
What do you do?
What do you do with these fuses?
I have a bunch more than this
r/ScrapMetal • u/MAScrapMetal • 1d ago
Cool Stuff 😎 Anyone ever scrapped a safe?
I get that tools and time is an issue… but how can you let this go by without at least trying to open it!?!?
r/ScrapMetal • u/robofish_911 • 1d ago
Scrap Photo 💸 Ballpark range for something like this?
It came from my pool. Im going to remove all the ABS and PVC. In Los Angeles.
r/ScrapMetal • u/Herrben • 2d ago
Question 💫 Advice on an easy pick up.
t wasn’t that easy I had to carry it 157 steps. Probs 20k+. I could look it up but could anyone who knows tell me if it’s worth stripping this or weigh in as is? I know it’s what my times worth but will it make much difference? Reselling as is might be a better option but don’t want to deal with people. Thanks
r/ScrapMetal • u/JimWanders • 2d ago
Best way to scrap these J-fuse?
An electrician gave these to me (he had 13 of these J-fuse) since i happened to mention to him that i scrap copper just as a hobby. He said the plate ends are copper (although he said sometimes they are a mixed metal).
Anyone has scrapped these before? if so are they copper? and whats the best way to scrap em? Just cut off the copper plates with angle grinder?
Appreciate the help. Happy scrapping.