r/redneckengineering • u/onephatkatt • 7h ago
r/redneckengineering • u/Lavasioux • 8h ago
Leather belt stamp from bicycle chain
The buckle is a timing chain from a Kawasaki 1400, and it waranted an equally tough belt.... so i just laid a bike chain on it and then clamped a 2x4 to it and whacked it with a hammer to stamp it in.
r/redneckengineering • u/razvanght • 11h ago
The 3-layer EV weatherproofing package: window, plug, and cable, with the cable secured by a strategically placed rock
r/redneckengineering • u/Head-Ad-4952 • 13h ago
air conditioner for tractor
My friend said I should post it here,so I post it here
I drive my tractor a long time a day so I guess it's a fine upgrade
r/redneckengineering • u/zemadema • 14h ago
Treehugger beer holder
I think this very bright example of italian engineering belongs here.
r/redneckengineering • u/SweetSmartSilly • 22h ago
Help me fix this collar?
It's not returnable, and too small. I don't know how to make it a little bit bigger. Any ideas, y'all?
r/redneckengineering • u/Admmak • 1d ago
Original handle was in the way of the cavinet door , so I had to replace it. Now we have a short of vintage vibe oven.
r/redneckengineering • u/Severe_Monitor7823 • 2d ago
Just looking for validation in my execution and display. It feels tacky at best.
r/redneckengineering • u/Repulsive-Novel-3473 • 2d ago
Found the most cursed Facebook Marketplace listing
galleryr/redneckengineering • u/Expensive-Metal-6618 • 3d ago
DIY outdoor/indoor sink. With electric heater
r/redneckengineering • u/cosmicrae • 3d ago
Shop-Vac wet hose attachment, for narrow spaces
For a number of years, I've had a need to remove moisture from tight places (usually when cleaning crud from the AC system). Using duct-tape was not practical, and it ended up with adhesive stuck to everything. Then I realized the solution was to trim a few shims from a pool noodle. They have the right amount of flex, can be trimmed to the size needed, and are cheap to replace. First photo shows the vac hose 3 bits of noodle, and a thick poly hose. Second shows the poly hose partialy inserted using two bits of noodle, third is the finished product. It's great for cleaning the AC, and for excess moisture in the bottom of old refrigerators, and easy to take apart for flushing afterwards.
r/redneckengineering • u/Bri3nWithA3 • 3d ago
If it works, it works.
On the back of a bus lol
r/redneckengineering • u/Ok_Impress1090 • 4d ago
I got my laptop a new screen!
In short this was an Acer Aspire E5-575-33BM. It is now just an E5-575. I bought this laptop a replacement battery, it came in nearly snapped in half so i got a refund and got another battery! then the motherboard went out, so i bought a new 575-33BM but i received only a 575. It works so I didn't complain much. I upgraded its ram from 4GB to 8GB. Then my LCD went out! I bought another, that came in broken as well. Just my luck. I got a refund and haven't touched this laptop for 7 or 8 months and last night while researching it a bit, i found out my old chromebooks lcd was compatible with it! I ripped it apart and took out the lcd and put it in my laptop. The only original thing about this laptop at this point is the shell, keyboard, and touchpad. I had it since 2015 and I refuse to let it die. Oh and I also replaced its disk drive, I forgot to mention that. This thing has been through hell and back but it's still kicking.
This thing looks so stupid with that "new" screen but damn do I love it! It's perfect. It might only be 1366x768, but that's good enough for who it's for!
r/redneckengineering • u/HoneyBear4Lyfe • 4d ago
Sock putter-onner has been lost in the mail for 3 weeks
r/redneckengineering • u/Key_Area_9737 • 4d ago
A quick on the spot sort of catchcan I made for my brothers car
The CCV of the car was spitting so much oil into the intake the 1.9tdi became a run away. So threw this together in hopes it catches some oil