track title: hammer

won't you go home soundboy?????

Started producing DnB again

Daw FL

VSTs Vital

Its my first track in a while, started working with a brilliant pianist that can just shit out catchy little licks

Listen to End of an Era by Invader Jymn on #SoundCloud

https://on.soundcloud.com/bN0xO2xPi9KoioAu7x

I always use a compressor, saturation, and sometimes distortion. Does anyone have a present drum bus that they use on mostly all their drums?

I've got the drums down as far as making DNB (mainly jungle, Neuro, & jump up). I've learned to chop and layer samples. But now I want to learn the next steps. I think this is the basslines? Idk maybe I'm wrong. Are there any creators I can look to for help?

Looking to upgrade my studio monitors, Iv mainly been debating between the Amphion one15’s and the Focal Alpha Evo 50’s also been told Dynaudios are really good.

At the moment my studio is in my bedroom which is untreated, but mainly looking for good monitors that have good low/low mid range.I make a mix range of bass music. I have a pair of very good headphones (Neumann ndh 30’s) that I mainly use for my mixdowns so mainly just looking to get a pair of monitors for the creation process of my tunes.

If anyone has any good recommendations that would be amazing! Cheers

hey guys so i havent been producing actively for quite a long time. currently im looking through some of my old abandoned wips and i found this track that I quit midway. it's basically a combination of euphoric hardstyle + 2010s youtube intro music + [IVY] + Ekko & Sidetrack if you get what i mean. it's still in its very early stages, so mixing, mastering, arrangement, etc arent there yet, but i feel like maybe theres some potential to revive this track if anyone likes the idea at all.

so yea, question is, does anyone think theres some potential to possibly continue working on this abandoned wip?

Forgive me for a few things.

1. Yes i did use AI to make this thumbnail. this seemed to really upset someother people in a Dubstep forum, (different track) so I am putting it out there now.
2. If it helps the artists, the art underneath my Daw-less device was actually hand painted by me. So don't hate.
3. This track was made Daw-less without any screens or software - just pure sequencing power.
4. Art is within the eye of the beholder.

Hope you enjoy the track :)

Does anybody know where this “hooo” vocal shout comes from? Or a track that it is in? It plays at the beginning of Kara vs blade runners cruclash set doubled with gray’s told you

Hudak,100Лиця,Chico&Qatoshi,Motana - Кажи мені правду

https://youtu.be/NTr0lUXMWBw?si=d0BaIsLlWW-fhD30

Hi everyone, at 1:31 there's this rising resonant ping-pongish sound I've encountered in many breakbeat tracks, what is it called?

I know its bad but want feedback so i can actually make some good Dnb versus whatever this is and no im not joking im just inexperienced with music and am bad at making music.

This is my first ever decent track draft, so I’m still learning and I honestly don’t really know what I’m doing yet.

I know the intro might be a bit cheesy or cliché, but I actually like that kind of atmosphere, so I wanted to experiment with it.

The main problem is that I don’t really know where to take the track from here. I’m not sure how to continue it, expand the idea, improve the arrangement, or make it feel like a complete song instead of just a short draft.

I also don’t really know how to classify it. I was aiming for something inspired by artists like Sewerslvt and similar atmospheric breakbeat/DnB/jungle styles, but I’m a complete beginner and I don’t know if this would technically be considered breakcore, drum and bass, jungle, breakbeat or something else.

I’d appreciate any kind of help or feedback: composition, drums, bass, sound design, mixing, structure, or just general impressions.

Thanks to anyone who takes the time to listen.

Q: what spectrogram plugins did you try and what's your favorite one? Do you find them helpful?

From what I read and watched it seems like spectrograms are one of the best visual tools to glue kick and bass. So I'm considering getting one.
I found a few plugins online. The iZotopes RX is too expensive for me, Melda's MMultiAnalyzer is okayish.

Hi people,

I posted this track I'm working on the other day and got some really helpfull feedback.

I made some changes, what do you think?

I have a pair of monitor speakers, but probably use headphones something like 90% of the time (be kind to the neighbours...). So most of the time im using a pair of Beyerdynamic 900 Pro X. I got them a couple of years ago and really like them, comfy and sound great either for me when im in Ableton or listening to pro made music.... but, I have noticed things sound wildly different on these headphones vs monitors, and even more so bluetooth speaker, other headphones (and obv phone speakers). My approach so far has been make a track sound as good as I can on my headphones, then check on monitors/soundbar and tweak.

So I recently downloaded the free Headphone Lab plugin but im a bit confused about how to use it to get better at mix/mastering. I put in the serial number and now I can turn on 'headphone calibration for neutral sound', which flattens the frequency diagram, but the initial impact is it just makes my track sound a lot worse 😂 Anyway, the confusion for me right now is, why do I want to mix perfectly neutral when only production nerds really listens on neutral - so dont we want to mix for some kind of best possible average of AirPods, smart speakers, cars etc? Then I guess if you're pro and playing music on big systems you have a mix and master for that? Is that where 'neutral' is desirable? How do you all approach this to give your ears a fighting chance of pulling off a good mix?!

i’ve been wanting to move toward neuro n tech step and this is the first track that i’ve made so far in that direction.

feedback would be greatly appreciated !

If anyone's got a few minutes I'd really appreciate some feedback. It's only the second track I've made so I'm still figuring everything out haha.

I feel like the middle gets a bit confusing, but I'm wondering if I might actually be onto something here? Any feedback at all would be massively appreciated.

Cheers

First time making something on the neuro side of things and just after some feedback on what I could change or work on

Skip to 1:30 for the DF switch up

TIA 🙏

This is My First beat and First time Producing, I really want to know how i did BTW i am quite young.

This part is universal:

You should spend some time "diagramming" the arrangements of other dnb tunes. E.g. it's usually 8 bars intro, 7 bars build, 1 bar turn around, HEN the drop. (or if you produce at 174, 16 bars intro, 14 bars build, 2 bar turnaround before your 30 bar drop, with a 2 bar turn around, then a drop escalation, then the drop cool down, then a break, then a build, then a drop... it's all ~16 bars, innit, but you know, 2 of those bars is the turn around)

This was also my answer to the "how do you never have writers block" on one of the subs the other day. I didn't post it, but, it's how I never have writers block. I either use my current reference track, or I go find a good reference track and start breaking it down, then comparing my track to the track I'm breaking down... you go reverse engineer a track, you basically have a paint by numbers where you just fill in your own sounds...

Your drop kinda comes in in the middle of a bar. GRab your fav tune, pull it into ableton, then draw an empty midi clip where the intro is, draw a midi clip where the build, the turn around, the drop, the break, the build, the 2nd drop, etc. Level 2 is to start drawing out where you hear the kick, where you hear the snare, etc...

ok... this feeds into the first bit. This was written specifically about one person who was asking for feedback... but seriously, do you know how often this is accurate? I DJ at 87 because I know that every 8 bars there's a turnaround and I can always be safe making 1/2/4/8/16/32 beat loops... (32 used to be the max, which is 8 bars, but that's really 16 bars of 174 at 87... which is generally a phrase...)

SO if your "drop" comes in in the middle of a bar, like... that confuses people and makes djing hard. People think in sets. I'm all for breaking the rules, once you know the rules... but... I mean Aphridite is the king of long ass intros, but even then the drop is some multiple of 8 (again, when counted at 87BPM). usually like 32 bars.... (which would be 31 bars on a CDJ).

TL;DR: The best thing you can do is reverse engineer your fav song(s) in the daw. Drag it into the song into your daw, set the tempo, then start drawing out empty midi clips, where do you hear the kick? Draw an empty midi clip.

create a new midi channel, where do you hear the snare, draw an empty midi clip there.

where do you hear the...??? Whatever... draw an empty midi clip for EVERYTHING you hear on a new channel. Then when you're done, you have a paint by numbers to make your own song.

SO WHAT! If you copied the exact structure. You put in your own samples, your own riffs, your own sounds... it's not the same song even if you "painted by numbers" by filling in all of the empty midi clips with your own sounds.

Do you want to see me do it live? I can direct you to recordings of me diagramming tracks.