I may finally be ready to lift my truck and Im only familiar with Bilstein kits..Is it actually great for a daily driver that still sees the occasional trail? For those who have tried, how has the ride quality and reliability been over time? Where did you get yours? Shock Surplus, mudify, or somewhere else?

I decided to do value cover gaskets over this last weekend on my 04 with ~190,000 miles. This is what my head looks like. Any concern here or is this looking good? I also should mention, that for some reason, the passenger side head was in slightly better shape

My 2006 has these pinstripes, were these a factory option? They’re basically missing from the doors and front fenders, and faded everywhere else. Kind of a sliver color - I’m not sure if they’re painted on or very thin vinyl, but taking it to a stripe specialist today to get my options. Due to shadowing (if they can be removed) I’ll probably go back with something, any color suggestions? Car is Galactic gray and pretty much blacked out.

Hey guys, I recently bought a 2007 V6 and one of the first things I’d like to do is get one of the TRD pro Grilles (the stock chrome is starting to bubble and looks awful).

For the Canadians in here, where is the best site to order one from? I really liked the customization you can get on the one from 4R Customs but I’m unsure if there’s any place better for shipping to/within Canada, Alberta specifically.

Thanks everyone!

Defroster works normal, AC can work but only works on the vent that blows down below. I cannot get the AC to blow through the main front vents across both driver to passenger side. What could this be? I definitely hear the AC but do not feel anything coming out. I think even one of the settings I could feel a little air but still very weak. Blows cold and warm no problem as well if that helps for diagnosing. 03, 250k miles.

Did a little work on the suspension recently. Replaced the aging XREAS with Bilstein 5100, new lower control arms (ball joint boots and bushings were rotted) and CV axles. Drives like a new vehicle.

Swaybar links and bushings will be tackled as soon as the heat breaks.

coolant goes to the reservoir but is not goin back to the radiator instead it’s gets fill more and more when I open the radiator cap in the morning the reservoir cap just fly to the air a lot pressure on the system the coolant is cold as it can get. I replace 2 thermostat and 1 housing and radiator cap twice the pressure is lower but the coolant keeps goin to the reservoir and not goin back and it just overflow on the reservoir but radiator it’s just empty. Car does not over heat it drives perfect but it does take its time to get to running temperature I also burpee it like 3 times. I don’t have white smoke or milky oil cap

Finally been working on my 05 v6 4R. getting all maintenance done and just small things to keep it going. Recently put a leveling kit cuz the rake was bothering me and slighty bigger tires. This thing is still comfortable and drives like butter even at 211k miles. My only issue is sometimes cruising through town I like to drive with windows down and one day I heard what seemed to be an exhaust leak (maybe at the exhaust manifold?) under heavy acceleration. I've done the ole chris fix it exhaust leak test. Put a leaf blower in the tail pipe and some soapy water at each flange and weld and even at the manifold but no bubbles.. wondering if anyone has had this same sound....? Is it just showing it's old age...? Regardless love this thing and has been so good to me through the years.

I’ve been hearing this noise for the last week or 2 at slow speeds, it’s a rhythmic metallic tapping noise that occurs at slow speeds and can start from 20mph down to stopping. I looked around and my brake pads had the anti rattle clip on the bottom so i went to Autozone and bought a second pair to put on the top of the pads as well. I can get it to happen 100% of the time by lightly tapping on the brakes when going 15-20mph and letting off to cruise and the noise starts until i put a good amount of pressure on the brake or when I come to a stop. I have also replaced both cv axles in the front since they were bad and made some noise when I wiggled them but that still did not fix the issue. I also changed the front brakes in January and have not had any issues since this past week.

The video is in a parking lot on a flat surface and I was traveling at about 15mph again and lightly tapped the brakes to hear the noise clearer due to no highway noise.

A second video, which I can not include, was taken on the highway in traffic on a down slope. I was at a stop and let off the brakes and the tapping started at around 5mph and got quicker until about 15-20mph when it stopped above that speed.

Pls give any advice or knowledge to help save some money. My thoughts is that it is possibly one of the front rotors that may have uneven wear that taps the brake pads at a slow speed. Thanks in advance.

I know from wiring trailers that there is an accessory wire on a 7pin plug. What I am looking to do is add light bars to my trailer and have them connected to a poverty spot. The light will be rear facing so I don’t want them always on, but I do want to be able to turn them on/off from inside my 4R. Any help is appreciated.

Brake light comes on and all the sounds posted in video.. usually right after starting my car- sometimes before I begin driving, sometimes right after I drive a block or so, and yesterday while I was going 65 mph on the freeway! Usually lasts a couple minutes or more. I checked fluids and all good .

I’m liking the idea of keeping my body as stock as I can, 04 V8. I want a spare tire mount that comes out of the bottom reflector on the bumper. Has anyone by chance built their own and have some measurements? Looking for a place to start before taking the bumper off. Thanks for any help.

Looking for some quick advice here I swapped the cat back exhaust yesterday and the original welded bolts on the y pipe were shot. One was halfway gone. One was completely seized and took a few hours to get the bolt out.

I am struggling with the best method/tool to cut the remnants off of the flange. I’m struggling to fit a saw blade in there because of the lip.

Would a dremel be my best bet? Or am I not thinking of something.

Here’s a google image photo just to illustrate what I’m talking about

And ooh she looks good. Now to figure out how to get these Sierra Stripes under control.. What are y'all using to manage brush scratches?

Looking for a tray to fit in my 07 4Runner center console for better organization and storage. Looking for one that works around the OEM coin storage. Any recommendations?

Hi all, if you remove the existing foam from the door panels and replace it with thinsulate, would that insulate the car better? Just a thought while I was sound deadening the car and noticed large gaps where you could drop in insulation.

About an hour of pure elbow grease completely transformed the look of the car. Appreciate yalls advice greatly

Planning to cover the doors and floor with sound deadening, anyone know how much material I might need?

Hey yall, bought a new fuse box for my 4 runner as the old AC fuse broke inside the fuse box. I have an SR5. I think this fusw box came off a limited. They have the same part number however they aren't perfect matches (yea maybe should've thought it through before buying new one). Anyways will this new fuse box wire in and work properly? There is definitely some mis matches with fuses in different spots etc. Any input is appreciated

Disregard the music deciding to turn on right before the noise (i had just turned the 4runner on)..

So this happens randomly when i shift into reverse or am coming to a stop, but what is that grinding type noise? I can almost feel it in the brake pedal sometimes and it’ll happen randomly while driving, usually while slowing down (without braking) or coming to a full stop. Any ideas or suggestions?