I just pieced this together this week. Vortex Crossfire 2 in 1-4 x28. Amazon rings and Amazon mlok bipod. I 3d printed the mlok covers

All of a sudden I can’t find Remington .22 subsonic anywhere?

There’s a little bit of Winchester .22 sub locally but the last box of that I bought had quite a few misfires. If it won’t cycle reliably in a 10/22 then it’s pretty much junk IMHO.

Hi!!!

Im looking for an AR-15 style chassis i can 3d print!!

Like the Chortex chassis for the Ruger 10/22 Its perfect !!

Anyone ever done this ???

Thank you guys !!!

I just got a pair of LOK grips for my Buck Mark lite. They fit fine, but after install the mag latch lever doesn't work correctly. I have both the OEM lever and a Tandemkross Titan paddle. It takes a LOT of force to drop a mag, and it's not a fast drop. I put the original rubber grip back on and everything is fine. If I loosen the right side LOK grip it seem to work well, but I'm not thrilled with the grip not being tightened down all the way. Has anyone else had this issue? I assume I could lightly Dremel the LOK grip over the spring that puts pressure on the lever.

Leupold glass and HUXWRX Flow TI supressor.

Picked up a Ruger precision & threw on an Arken 4-16x44 on it. Took it out this weekend & couldn’t have been happier with the performance of this fun with CCi 1070s at 100. Shot out to 200 & had too much fun. Suppressor is a Warrior Systems legionary .22 & this set up with Winchester 1435s was still hearing safe & a treat to shoot!

I recently got into gun ownership and bought a Ruger 10/22 as my first gun. Let's say I am completely hooked! Really glad I got this as opposed to something like a MP5 SMG because I'm learning my basics

I know this is nothing long range with my setup and a simple Holosun red dot, but I'm really excited to start taking this outdoors to longer distances

I bought a used Ruger target lite model #21186 that had some kidd upgrades put on it. Ordered a couple BX-25 magazines for it and when trying to insert them instantly knew it was a no go. I can’t find any markings on the trigger housing to tell if it is stock or aftermarket, the mag release doesn’t look like the stock photo. Do I just dremel down the lip on the magazine or return them and try and find ones compatible?

First .22 suppressor for me, looks great on my Tippmann.
Now I need a second one for the TX22 lol.

Excited to bring this guy home today. Dumb question - will Ruger MkIV mags work in this gun? Black Mamba mags seem to be out of stock everywhere!

A short of shooting a new barrel.

Hey Reddit,

What weather ballistic computers are you using for NRL22, 22lr ELR and PRS? And why?

Vortex ace

Kestrel 2700

Kestrel 5700

Kestrel 5700 elite

My wind calls are shit

Thanks

Ignore all the outer shots. I found the target in the trash at the range and the center was empty. All the CZ shots are the ones within the blue circle. First time shooting it and getting it sighted in. Really liking it so far. At 50 yards.

I hope it’s alright to ask this here, I can’t find any active groups for 22mag. I was given a lot of .22wmr ammo (probably 3-5k rounds) for free. While I’ll never turn down free ammo, I’m now in the spot where I’m not sure what to do with it. I have a rough rider with both cylinders, but that’s it for .22wmr guns. I’m considering buying a rifle, but I’m not sure what use there really is for .22wmr that .22lr can’t handle, or that I’d need to size up to a larger round for. If I get something for plinking only that’s fine since I have so much, but once I run through it I doubt I’ll buy more when .22lr is much cheaper to plink. Any advice on what .22wmr can be good for, if there’s any rifles you recommend, or should I just have basically a lifetimes ammo for the .22wmr cylinder for the Rough Rider?

Anyone seen browning line up for the buck marks recently? Anyone have a thumb hole buckmark in here? And never thought a 10” barrel buckmark would exist

Just picked up the bull barrel last week. So much fun.

Takeaways from Week 2 (attempts at witty connections remain all me, not AI. So even if they aren’t funny or don’t resonate with you, at least it’s a human you can be disappointed in ¯_(ツ)_/¯):

• We had our first perfect score...twice this week! From a few benches down from me at the range with a beautiful gun. (rifle and target photos are on the website's main page)
• u/MeisterMacher put together another strong performance, becoming the only competitor to finish on the podium in each of the first three weeks.
• Things are starting to get tight at the top. If we ever get to the point where the entire top five is shooting in the 240s to perfect, we may have to introduce a time component as a tiebreaker.

And without further ado, the results for Week 2, ending today, July 19, 2026, are:

1. 250 - Zesty Shooter - PQP/Stiller 2500X - Chicagoland
2. 250 - Fetch Shooter - PQP/Stiller 2500X - Chicagoland
3. 249 - u/MeisterMacher - CZ 457- Northeast Ohio
4. 242 - u/Goblin_Smacker - Tikka T1x - Chicagoland
5. 218 - u/Equivalent-Jello622 - Ruger 10/22 - Virginia

Thank you again to everyone who participated. Week 3 is now underway, so please tell anyone you think may be interested and get those targets submitted by Sunday, July 26 at 7:00pm CT!

Full leaderboard, every submitted target, historical results, and this week's submission page are available at TheWeeklyRimfireChallenge.com

I live in California, and am interested in getting a double action .22. My budget is $400 - $500, which leaves me with one option if I want to buy new - Charter Arms' Target Pathfinder. The alternative is to try to find a C&R exempt piece. I might be able to get a K-22 in that price range, but I'm not sure if it'd be better to go that route rather than just buying new.