Hi, everyone!

I ran a moderation analysis (Model 1) using the Process macro. I need the evaluation script (the syntax code) for an assignment. When I open the script via “Insert” and then save it, I get error messages when I try to run the script again, but in the end, the completely correct output appears (below the error messages). How can I fix this so that the script runs correctly without the errors at the beginning?
(Translated from German to English)

Hello, I am taking an online statistics class this upcoming fall semester and am wondering if anyone is willing to help me. I am applying to a very competitive nursing program and would like to achieve an A in this class.

I developed my own 5-point Likert scale (Strongly Agree to Strongly Disagree) and I’m checking its reliability in SPSS using Cronbach’s alpha.

Do I need to reverse-score the negatively worded items before running the reliability analysis, or should I run it first and then reverse-score if needed? Also, how can I tell which items need to be reverse-scored? Cause I did and this is what happened.

Any advice would be help!

First research project. Need to do the above and it seems SPSS is the best software to do it. I have no idea where to even start or what stats to do despite reading up on it again and again. Looking at different factors affecting a lab test. I have all data in an Excel spreadsheet and started making basic tables.

Would really appreciate any help or if anyone could reach out to me and I am so sorry if this has been asked a million times before.

Thank you so much

Just a small doubt

(I'm very bad at statistics) I'm trying to see if I can use one variable to predict another, simple regression was unsuccessful. The results (anova, correlation, etc) don't seem to be significantly correlated in any way, but my partial regression plots are extremely linear.

Some things that might be important:

•the number of cases is 20

•the n=9

•there are no residuals

•all variables are quantitative

If anyone could help, I would be very appreciative.

I have three groups with sample sizes ranging from 122 to 126 participants each. For one variable, the kurtosis values in the groups are 2,429 and 0,430. I am using the range of -2 to 2 as the acceptable interval for kurtosis to justify the use of parametric tests. Since one kurtosis value slightly exceeds this range (2.429), I am unsure whether I should use a nonparametric alternative (Kruskal-Wallis test) instead of ANOVA. For another variable, the kurtosis values are even closer to the acceptable range, with values of 0,431 and 2,113.

I have conducted both ANOVA and Kruskal-Wallis tests for both variables, and the results were similar. However, I want to choose the most appropriate method to report in my thesis. How strict should I be regarding kurtosis values when deciding between parametric and nonparametric tests?

I will be very grateful for your insights.:)

Hi, has anyone bought a laptop with ARM-based processors like the Qualcomm Snapdragon? Does it support AMOS?

I’m doing a MSc psychology and when it comes to demo the only bit that is crucial to my research question is age, of course gender will be included as well - should ethnicity breakdown be an expected stat included since psych studies always complain about having WEIRD samples?

it’ll all go in a table so wordcount isn’t too much of an issue

Hi! I'm running a scatterplot analysis using Chart Builder for two scale variables on X & Y and wanting to column-panel them according to three categories within a dichotomous multiple response set. I've already run these analyses separately for each of the categories, but I'm trying to find a way to consolidate them into a single figure. I'm aware that values are not considered a valid aggregate function for multiple response sets by default, but I'm wondering if there's a way to get around that to achieve the desired results? Means, medians, etc. won't suffice in this case, unfortunately - I need the exact values for each scale variable indicated by each person.

Essentially, I want to see each of the three graphs side-by-side for all cases which indicated the option in question (e.g., the scatterplot for all cases selecting A + the scatterplot for cases selecting B + the scatterplot for cases selecting C) - I'm fine with repeat cases (i.e., if one person indicated A & B, then their datapoint should be present on both A & B's scatterplots), but don't want to distinguish between cases who only selected A, B, or C and cases which selected A + B, A + C, B + C, or A + B + C unless that's my only choice (in which case I suppose I could just assign value labels for each of those cases by hand).

If there isn't a way to do this via Chart Builder, is there perhaps another method I might want to try and pursue? I'm not familiar with how to open the coding menu in SPSS or writing code in general, but I'm open to trying it if that would be the only way around the value function issue?

I’m trying to follow IBM’s instructions on hiding excluded cases, but I don’t seem to have the option in Edit > Hide excluded cases in my menu?

Hi everyone :)

I am currently analysing data for my master’s thesis in SPSS and I am unsure whether the data cleaning, variable calculations, and statistical analyses were implemented correctly (I had no idea how SpSS works)
I would particularly like to verify whether:
inclusion and exclusion criteria were applied correctly,
missing values and special codes were handled properly,
recoding and scale calculations are correct,
the selected statistical tests are appropriate,
the syntax contains any logical errors,
the analysis follows the previously defined analysis plan.
What materials would be needed for an independent review? Would the analysis plan, variable overview, SPSS syntax, output, and a fully anonymised dataset be sufficient?
Are there also recommended consultation services, platforms, or procedures for having an SPSS analysis checked both statistically and technically?
Thank you for your help!<3

Hey, got a question about study test selection on Spss. My dataset contains knee pain data. I have 30 patients with one sided knee disease. Other sides of those patients are designated as control group. I also have 30 healthy subjects without knee disease, which i am using as control group as well.

So group 1: Patients affected knees (n=30)

Group 2: Patients healthy knees

Group 3: Healthy subjects paired knees (If patients left knee is affected, then i'm using healthy subjects left knee as well)

Group 4: Healthy subjects other knee

Comparisions:

I am doing 30 (Effected) vs 90 (Control). Then i'm doing pairwave comparisions

Group 1 vs Group 2

Group 1 vs Group 3

Group 2 vs Group 4

Group 3 vs Group 4

The question is, which test i should use for categorical data (0: Negative, 1: Positive) and for Lineer data

As far as i understand, patients two sides (Effected vs uneffected) is dependant variable. But patients effected side vs control groups same side is independent

I would normally used Chi squared/ANOVA and do Bonferroni correction but in this setting i cant do it?

Should i use generalized estimating equations instead?

Or should i just scrap 30 v 90 and do seperate comparions? (In this setting should i do Bonferroni correction?)

Thanks :/

Hey, I need help with my dataset, specifically regarding regression, moderation analysis, and mediation analysis.

I have a dataset with very little missing data (0–1.59% per item) and a sample size of 377. I’m planning to use Predictive Mean Matching (PMM) for imputation in SPSS. My subscales measure different constructs, and I was thinking of imputing each subscale separately, including only the items from that subscale plus group membership as predictors.

Is imputing each subscale separately a good approach? Is it sufficient to include only the subscale items and group as predictors, or should I also include other variables like demographic data? Not all demographics are relevant for every subscale, and I think including them would mean I might also need to include other subscales because they are related, which could make the model too complex. So, I’m considering just including items of each subscale and group (experimental, control).

Any thoughts or recommendations on this? It is my first time using this method, so I would really appreciate your advice. :)

I have a statistics class where we use SPSS to do data analysis projects. My professor thinks I used AI so she gave me a zero and is making me do an authorship verification on Tuesday. She’s going to ask me to do similar problems or explain the work, and if I don’t pass, I don’t get credit. Can someone help me cheat PLEASE I feel like there’s no way past this. PLEASE HELP CHEAT

which type of cluster analysis fits this case please? (hierarchical, two-step) Researchers hypothesized that students can be classified into naturally occurring academic adjustment profiles based on their psychological and academic characteristics. Using the variables Total Self-Concept Score, Total Academic Motivation Score, Composite Academic Adjustment Score, and Average Daily Study Time, conduct an appropriate Cluster Analysis to identify meaningful student profiles. Determine the optimal number of clusters, describe the characteristics of each cluster, and interpret the obtained solution.

I have a statistics class where we use SPSS to do data analysis projects. My professor thinks I used AI so she gave me a zero and is making me do an authorship verification on Tuesday. She’s going to ask me to do similar problems or explain the work, and if I don’t pass, I don’t get credit. Can someone help me cheat PLEASE I feel like there’s no way past this. PLEASE HELP CHEAT

Can someone please help me with my spss assignment. I don't need it to be done by anyone I just need a little help with conducting and interpreting the output. Please don't try to scam me and ask for money

Hello. I'm not sure if this has been asked recently but, I would like to get some recommendations on good sources to learn how to use SPSS. I have already gone through Andy Field's Discovering SPSS and have heard a lot about Laerd Statistics, but, they do not accept payments from my country, as such, i cannot access it either. Are there any other sources you would recommend?

I did t test for gender, married/single with continuous numeric data type but for age group, education I did Kruskal Wallis. It's been months I don't remember how I did it is it wrong should it be both t test and ANOVA or my way is somehow possible?

Chi mi da una mano prima a capire cosa devo fare e poi a farlo?
ho un dataset con variabili binarie ( età (<25), genere e reddito (>tot)) e 4 variabili in scala che studiano le intenzioni all acquisto di 4 prodotti: con o senza certificazione ambientale e di brand famosi o non famosi.

Devo trovarmi come risultato una tabella di questo tipo che mi ha fatto il professore

Dove notorietà accoppia le due variabili dei prodotti famosi (con e senza certificazione) e certificazione accoppia le due variabili dei prodotti con certificazione (famosi e non famosi)

Chi mi puo aiutare? Non so come accoppiare le variabili e non so come proseguire l’analisi perche non ho idea di quello che sto facendo

Spero si capisca quello che ho scritto

Hi everyone,

I developed a Google Sheets add-on for a problem that is probably familiar to many people who work with SPSS: preparing Google Forms data before analysis.

When responses come from Google Forms, the column headers are often full question texts. That is useful for reading the form, but inconvenient when you want a cleaner variable structure before exporting or analyzing the data.

One of the functions in the add-on is:
`=STATS_COLUMNS(range)`

It creates numbered, variable-style columns based on the original form headers, so the dataset becomes easier to prepare before working with it further in SPSS or another statistics tool.

This is not meant to replace SPSS. The idea is simply to make the preparation stage in Google Sheets cleaner, especially while new form responses are still coming in.

For transparency: I’m the author of ALS Stats, and this function is free.

I’d be interested to hear how others handle this step. Do you usually clean and rename variables after exporting to SPSS, or do you prepare the structure earlier in Sheets or Excel?
I wrote a short explanation with an example in a link.