STL by Bulkamanser

Sculpted by : https://www.patreon.com/cw/bulkamancer
Painted by : https://www.instagram.com/pixeltoplasticlv/

Finally finished this. My favorite project yet although the skirt was a pain to paint. Purchased the file from "MyAnimate"

5 hour total turnaround and just in time to hand off to them. What a world we live in.

Sculpted by : https://www.patreon.com/cw/TanukiFigures
Painted by : https://www.instagram.com/pixeltoplasticlv/

Enjoy…

I tried to print this Bender with my printer... And the leg is printed wrong and some of the fingers have minor defects, and the body is a little deformed. It seems that the support wasn't printed. My resin is expired but i dont think thats the issue.

Pls help. I dont know what im doing wrong.

I have a mars pro. Abs like resin from elegoo(expired) and chitubox with predefined configs and i added supports manually but doesnt work

Hello everyone! I'm in the process of preparing some Fallout 4 models for printing (personal use, can't share) but I thought some people might be interested by the process.

Picture 1 is the final result, picture 2 is the low poly model subdivided, and picture 3 is the raw mesh.

I got the original mesh from the game sources, but it's really low-poly. So I got on a hunt for a method to restore it to a decent enough standard to send it to the printer. My method so far:

• import model in blender
• subdivide modifier, set to 5
• put the normal map through a program to transform it into a displacement map
• use a displacement modifier with the displacement map

There is some tweaking here and there, but so far it's pretty straightforward. The next step is a test print, to see how good it'll look and how well it takes paint, and figure out how to import the rig and animation th get cool poses out of him.

Hope you find it useful!

Hey guys, I've recently bought a used wash station with some minor cracks in it.

I had the inner wash tank full of ipa standing in my enclosure with the orange UV lid ontop. 3 days later I found it cracked all over like that. Could that be because of IPA fumes or something?

Recently got a resin printer, and been slowly getting more and more to actually stay printed and not just look molten. Everything i print looks around the same, and after googling and messing with settings i have no clue what the reason could be. Any reason the supports print okay(ish at best) but besides one base kinda nothing ever sticks?

Elegoo Mars 5

Elegoo ABS-like 3.0

Whatever Elegoo's Proprietary Software is Called

I have been trying to get this thing to work for WEEKS. I have tried "leveling" the build plate. I have changed FEP. I put in a brand new LCD. Today, my print looks like the attached picture. For Pete's Sake, please just tell me what settings I need to change to make it work. I am spending too much time and money on this stuff. Was I bamboozled? Was I scammed? Someone please help, and please understand that the technojargon is going to just confuse me more.

I can't get a single thing to stick to my build plate.

I've monkeyed with the settings on the slicer, leveled the plate, replaced the FEP, and even sanded the plate itself.

It can't even go a few minutes without it sticking to the FEP film.

I'm about ready to throw in the towel. What am I missing? What went so terribly wrong?

Wth is my photon mono m5s doing 😢 i wanted to print some viking Helmets, and a straight up block turned out. it also has some shiny raster at the bottom, and it literally used all the resin up that was in the pool

Hi all, as seen on the pic below Chitubox has loaded my model with vertical lines that makes it seem like a dodecagon. The prints came out the same way as in the picture.

The original file was created to have a Cylinder there. My FDM printer loads the model as it should, however I need to print this in resin.

Printer is Elegoo Saturn 4 Ultra 16k and all other models that i printed before were smooth and were excellent.

Hey so I bought an old peopoly phenom L thinking it just needed a firmware update, but I updated the firmware and it still says unrecognized file type when you press start on prints. What could be wrong with this?

Have a Mars 2pro. Recently when removing prints im noticing there seems to be the first layer is the whole footprint. Then it starts with the actual printed area. so there is a thin rectangle covering the whole print. I dont know why this is there doesnt seem to be a setting in Lychee to do this for a single layer and my prints are just minis so they start with the standard circles for supports. Any idea why it seems my first layer the whole screen is turning on?