So I was on my laptop and im using a monitor so I have 2 screen, so like I have 1 hdmi port and 1 display port and I wanted to change the hdmi for my ps5 instead of my laptop ( laptop was Turned on) and I did my things on the ps5 it was quik after that I removed the ps5 HDMI of my monitor and I heard a ,,zzzz" so I try to turn of my monitor but I was already turned off cus of maybe the bug of the hdmi thing, after that I take a plastic rule and I tap a bit the monitor power and it was doing the ,,zzzz" thing, btw it’s my first Time switching hdmi while the monitor is on and my monitor is like less than 6 month old, For sure I removed the power of the monitor from my eletric outlet but idk If I should put it again and try if it’s working

Can i plug in and use this fan for tonight until i can fix the plug? it’s plugged into a surge protector, thanks.

My bill for June-July is $744, using over 5000 kWh per month for a 1400 sq foot cabin with 4 window units and a well pump. Still seems way too high.

4 5000btu units, set to 70. Its an old house with only the remodeled parts having inuslation. I know nothing about this just trying to find answers of what to do. We live in the mountains of northern Greenville County SC and have never had a unit installed.

There’s this little tree branch still attached to the tree that’s resting across these 2 powerlines. The line you see in the middle of the branch is above and it’s not touching. I know that in the right circumstances an entire tree and surrounding soil and be electrified and this is right next to the sidewalk and the base of the tree is in someone’s yard. I don’t know if I need to call someone or if it’s actually completely fine and I’m just being paranoid. I’m not even sure if this is the right sub for this so if there’s a better place pls lmk.

Brisbane, Australia if that matters

I feel very lucky after seeing some of the bills posted here.

Hi all,

I’m trying to figure out if switching off PECO’s default supply rate is worth it, and could use some real-world experience from people who’ve done it.

I am shocked at this bill, which goes without saying.

(edited to add key details):

2700 sq ft house.
Only run pool filter on off peak hours.
Only use AC and appliances on off peak hours (and often turn it off way before 2pm), so I’m sweatinggggg during the hours the AC of off.
I work from home, using a monitor and my computer.
Only charge EV on super off peak (weekdays and weekends).

Background:
• PECO customer, Electric TOU - DSP Residential Service rate

• My blended generation rate this bill was about 10.43¢/kWh (total supply charges ÷ total kWh)

• PECO’s current “price to compare” is 11.76¢/kWh, but that’s a flat rate — most of my usage falls in off-peak/super off-peak hours, so my effective TOU rate is already below that headline number

• Usage has crept up year over year (\~2,345 kWh → 2,674 kWh for the same billing period), mostly from AC and a pool pump

• AC: central air, only run after 6pm and off by 2pm, so it’s not touching the 2-6pm peak window at all
• Pool: pump has been running on manual on/off (whenever I remember), not on a timer — planning to put it on a timer so it only runs during the 12am-6am super off-peak window instead

What I’m trying to figure out:

1. Is it common for suppliers to lowball a teaser rate that jumps after a few months? What should I watch for in contract terms?
2. Any suppliers you’d specifically recommend or avoid in the PECO territory?

We hope it's OK to share this article we just published — it seemed like it might be of interest to folks in this community.

Most Granite Staters will see a jump between $6 and $18 in their monthly electricity bills starting Aug. 1, as the Public Utilities Commission has approved rate increases from the three investor-owned utilities and the Community Power Coalition of New Hampshire.

This year, the war with Iran and extreme cold spells this winter are contributing to higher electricity costs across the Northeast this fall. Locally, this is the first full year utilities have had to follow a new way to set rates, which advocates say is leaving customers increasingly squeezed.

How will these conditions impact electricity bills for residential customers in the Granite State? And why may they look different for different utility customers? NHPR has answers to some frequently asked questions about the upcoming changes.

Click the link above to learn more.

I literally lose power at my house almost every two weeks on average. I am sick of it. My food going bad. My old dog panting because she's hot. And then having to pay out the ass for electricity when it is working. I am so sick of consumers energy. I am so sick of this stuff it literally gives me anxiety. I have PTSD from losing power so often. I am tired of wasting my money. What the f*** is going on? Why can't the power stay on for more than a month at a time? And if they pay these guys so well then why can't they get them out there quick or getting the power back on quicker? I don't understand how they prioritize the outages but every single person that is out should be a goddamn priority. We pay so much on our bill and get the shittiest service. I don't remember any time in my life where I lost power this frequently. I am at my wits end. Fuck you Consumers Energy. They can shove their little $42 credit on the bill for losing it more than six times in a year up their ass.

I’m with contact energy dual usage required gas and electricity and there is a 3 % discount applied to the totalbill 117.50 so grand total was 515.67 .

I feel this is over the top and the most I’ve ever paid in 10 years living where I am. 2 people in the house and I’ve been going energy efficient and made the house more efficient over the years was extremely damp when we moved in and heater ran most of the day in winter then. Hrv running and house is now dry. North island bottom if info required. Advice greatly appreciated if there is a better company unfortunately usage will not change only the provider change is an option at this stage. Thoughts

Usage is consistent year on year but my bills are just going through the roof. Advice would be a greatly appreciated I’m happy to switch provider

Teka lang ah, paano natin naungusan ang ibang bansa sa mahal ng kuryente pero sa sahod at serbisyo nga-nga pa rin tayo? Nakakainis na parang napakanormal na lang mag-announce na tataas na naman ang bill next month. Sobrang bilis magmahal ng singil, pero kapag imbestigasyon at pagrepaso na sa mga kontrata’t franchise para protektahan ang consumer, biglang napakabagal kumilos!

Bakit laging automatic reaction na sa bulsa agad ng taumbayan ikakarga ang dagdag-gastos? Hindi tipid-tips sa pag-electric fan ang kailangan natin, kundi totoong pagpapanagot at reporma. Nakakapagod nang maghigpit ng sinturon habang sila pa-chill chill lang sa aircon!

I have a double-gang box with two 3-way switches. One controls a switched outlet, and the other controls a ceiling light from a second 3-way switch.

I made notes when I removed the old switches, but somehow lost them before installing the new ones. I usually take pictures too... of course this was the one time I didn't.

The box has three cables entering it:

Two 3-wire cables (black, white, red/pink)

One 2-wire cable (black, white)

I can't inspect the light fixture because it's a hanging light in the middle of a vaulted entryway ceiling, so getting to it would be a major project.

I did inspect the other 3-way switch that controls the same light. It is wired with:

Red (looks pink) on the common screw

Black and white on the traveler screws

I was able to get the switched outlet working, so that switch is finished.

That leaves:

One 2-wire cable

One 3-wire cable (5 wires total) for the remaining light switch.

Here's what's confusing me:

None of the remaining wires show 120V when tested.

The only constant hot in the box is the black wire feeding the outlet switch.

I don't remember that hot wire being pigtailed to feed both switches, although I do remember some screws on the original switches having two wires under them.

Things I've already tried:

- White wires from the 2-wire and 3-wire tied together, black from the 2-wire on the common, and black/red from the 3-wire on the traveler screws.

- Pigtailed the known hot from the working outlet switch over to the light switch common screw, placed black wire from 2 wire and red wire from 3 wire together on one traveler screw, then tested having white wire from 2 wire then with black wire from 3-wire on second traveler screw.

Neither configuration worked.

At this point I'm wondering:

Is there another wiring configuration I'm overlooking?

What additional tests with a multimeter would help identify which cable is line, load, or travelers since I am not getting voltage with wires when testing.

Any help would be appreciated. I'm comfortable replacing switches and have wired several other 3-way circuits successfully, but this one has me stumped because I lost my original notes.

Shared image of outlet switch wired in box and remaining wires for light switch, configuration I found with secondary switch that controls light with this light switch, image of all wiring in box before connecting anything.

Title: Urgent Help Needed – Any Contact in Ghaziabad Electricity Department? 🙏

Hi everyone,

I'm in a really urgent situation and would appreciate any help.

I have already paid my electricity bill on 9 july 26, but it's still showing as "Due" in the system. I have the payment confirmation as well.

The problem is that tomorrow is the last date, and if this doesn't get updated in time, it could create unnecessary issues.

Does anyone here have any contact or connection in the Ghaziabad Electricity Department (PVVNL) who can help get this checked quickly? Or if you've faced the same issue before, please let me know what you did.

Any help or lead would mean a lot. Thanks in advance! 🙏

Hi everyone!

We’re White Brothers Electric LLC, a small family-owned electrical contracting company based in Mesa, Arizona. We spend our days working on real residential and commercial electrical projects, and we’ve recently started livestreaming jobs, sharing troubleshooting tips, and giving behind-the-scenes looks at what it’s like running an electrical business.

We’re live today and would really appreciate your support. If you enjoy skilled trades, construction, home improvement, or just like supporting small businesses, we’d love to have you follow along.

YouTube (LIVE):
https://www.youtube.com/live/AmttXsSo1Yc?is=8svP2oYe6IEr7RRr

Facebook:
https://www.facebook.com/share/18ZoXNXMAU/?mibextid=wwXIfr

TikTok:
https://www.tiktok.com/@wbelectric?_r=1&_t=ZP-981pFMGjS2R

If you stop by the live, let us know you came from Reddit. We’d love to say thanks and chat with you.
Thanks for supporting a small family-owned Arizona business!

This led has been PISSING ME OFF it looks horrible because its rgb on silver and gold, which wire to i cut to get rid of it (Edit: solved)

I found my dream property, but it’s a 1/4th mile from these powerlines. Would this pose health risks?

I made a post recently about how my electricity bill had been tripled recently but still can't find reason. I had the AC turned from on to auto at beginning of month, the water heater was recently replaced a few days prior. Summer temperatures were similar last year and I've never had to pay these high of bills and it's quite distressing. I spoke to electricity and their sending energy auditor at the end of the month.

**Update, I think changing AC from on to auto was the solution because I spoke to teco and my electricity usage decreased from average of 80 kw down to 20 kw daily. I did touch the thermostat a while back but didn't realize I switched it to on. I had it set to 73 degrees and increased to 75 now.