I've been looking at reviews of wheels, trying to find something for my v2 that will smooth out our chip seal roads in NZ. The vibrations are killing me. I already have the 107mm ABEC 11 (big green ones) and they are awesome at handling bumps and going over stuff, even a bit of grass, but still get vibration on the road.

Would something like the Cloudwheel Rovers 110R or Hollow Wheels v3 actually be an improvement over the ABEC 11s? I see mixed reviews, and most of the video reviews in the US are of nice smooth roads or off-road.

Any suggestions? Pic of the pothole just a good example of the roads we have, not actually needing to cope with potholes :)

After missing a few good deals I managed to snagged this massive haul:

• 1x Boosted V3 Plus (<300miles)
• 1x Boosted Stealth (<300mils)
• 4x XR Batteries (two new, two maybe used all FW 2.1.7)
• 3 R29 remotes (one brand new)
• One boosted bag / board carriers (NWT)
• The low usage original wheels.
• Brand new OG boosted wheels.
• 2x fulls sets of Shred lights.
• 2x spare motors
• 2x chargers
• 2x OneWheel+ (both seeming functional with less than 30 miles each).
• mess of spare belts and parts.

For $250.....

Super nice individual that sold them and just wanted to see them back on the road and used. 4 out of 6 XR batteries were in RLOD, but most were like just over 500 or, actually, even less. No cells were below ~3.0. My local Bert client was actually unable to clear the RLOD for some reason but the online client managed it OK.

Is there a way to get a replacement for this piece of protection for the board?or any suggestion?

What the title says.

The guy I bought it from said the remote just stopped working, and he didn't want the hassle of fixing it. So I got the board, charger and remote for cheap.

There is no reaction when I try to turn it on. No light or sound. I suspected a dead battery, but I see 3.9V-4V on the battery terminals, so it doesn't look like it. Is there a common culprit for broken remotes that can be fixed?

Thanks!

Hey y’all, I found my old V2 Dual+, when i plug in the charger i get a blinking red light and the very bottom led turned red. I read about the BertLite being a possible solution? Is that all I would need? Any advice welcome!!

I recently bought a boosted mini X. I got home. It was on a full charge. It hadn’t been written for about a year but still had a full charge. I rode out the battery and when I plugged it in it flashed red is my battery cooked? And if not what do I do?

I have purchased and restored several Mini-X boards using my BERT Touch. This guy bought this board with only 40 miles on it. He came from Washington state, while visiting Palo Alto California he saw my listing on Marketplace. His mindset on buying a board over renting a car for his 10 day stay with a two mile daily commute was spot on. He said “Why waste money on a rental car when you could own a Boosted board.” We cruised around Stanford University for an hour. Welcome to the Boosted family!

Just a random post, as I swapped in a SR from a Mini to my Stealth to check out the stats on it. Is the firmware ok? It seems to have super low miles and I'm excited for when my battery gets rebuilt.

Just wanna make sure the firmware and everytjing else looks good on it. Pretty cool it recognizes a SR battery!

I also only rode it for about 200 ft, as the battery plates where the screws go were loose (from swapping in the SR battery), and tightening the screws down felt like I was destroying the board/threads. Maybe the loctite was preventing it?

Does anyone know if these would work for battery plate screws? As well as the motor box plate screws? Had some rattle free in a random part of my usual commute to work and I’m trying to make sure I get ones with the right thread length and flush heads but I’m not super versed in reading info on screws!

https://parco-inc.com/product/m6-x-20mm-flathead-socket-cap-screw-black/

Thanks!

Does anyone know what size screws and bolts are used for the motor covers, battery, and motor mounts on a Boosted Board V2? I’m trying to find replacements, so any specs or links would be really helpful.

Hey I got a quick question about some issues I’ve been having with my stealth. Showing 3 middle lights yellow indicator light breathing. I checked all the connections between the ESC and the battery applied the special lubricant still no luck. So I opened up the ESC cleaned it up and found some corrosion on the board. Is this fixible^

TL;DR I fried his remote and they are way to expensive online so I was wondering if anyone would be willing to send me an old remote for the cost of shipping or a reasonable price?

Hey everyone, my brother recently bought a v1 boosted board at a thrift store in non working condition for cheap. I was helping him fix it and we managed to get it working, but we were using a variable power supply to charge the remote and I accidentally over juiced it and it got fried. I just can’t afford to buy one off the internet because they’re going for over $100 but I was hoping someone might have one for a broken or lost board lying around they’d be willing to send me for the cost of shipping or maybe a more price? Thank you!

Hey guys, can anyone tell me if I installed these incorrectly? They seem to have a gap on them, and I couldn't get them to sit flush. I adjusted them a bit when I added new belts, but now they don't sit right. Anyone have this issue or am I doing something wrong?

Hello guys,

i have a boosted for like 7 years and its starting to die on me, i keep buying what i need to repair it but now i wanna buy a new board. I'm looking for one with good autonomy and one that would be all terrain but i dont know where to look and what i can trust.

So here i go, do some of you have some advise for me ?

thanks for the help

Hello all,

Recently ran into an issue with my ESC being on too low firmware to go with my Boosted Beams and XR battery.

Does anyone have a Stealth ESC on firmware 2.7.0 or above for sale?

Also interested in a V3 remote to be able to use Hyper Mode!

Thanks!
pic unrelated

I got a V1 Boosted Board to attempt to cheaply add belt drive to a project board (built off a Meepo Mini 2) that I’ve been working on and off for about a year. I just started to take it apart to see what I need to do to have it communicate with a controller (the guy on Facebook didn’t have one).
My project board runs off 36v and was going to under power the motors till I feel like upgrading my batteries. Is there any ESCs that I should look at getting for this? Or is there a way to gimmick it with the ESC from the Meepo Mini 2?

I'm looking for a v2 remote replacement and I can't seem to find them. Anyone have spares or don't use anymore they want to sell?

I need one and any help is appreciated.

Thank you!

Since i couldn’t get what i was asking for in the bundle deal im deciding to part out the complete board. The only thing thats “V2” is the deck. All other components are from a stealth and will be priced accordingly. Local pick ups in the Portland, Oregon metro area. Pm for any questions or for shipping quotes.

Remote (5 ride modes): 250$

Original charger: 50$

Motors: 80$

ESC (255 miles): 200$

Battery(amnesia chip installed): 300$

Front truck: 40$

Rear truck 80$ or can be paired with front for 120$

V2 deck(great condition): 120$

Motor covers and hardware: 60$

Orangatang Caguama and Reds bearings: 100$

Took apart my setup to clean and toss on some new skid plates. Red and blue were the only strong filaments I had, So I figured I'd try this combo out. What do you guys think?