Hey everyone, Yesterday I wanted to play ETS2, but when I started the truck and wanted to drive. I noticed that my FF is gone. I felt nothing. Holes in road, crashes and wheel not coming back to center of the wheel. I thought it might be because its new version but it is not. I tried Assetto corsa and its the same problem. If anyone know how to fix this, please comment. Thanks

I have Thrustmaster T300rs

Does anybody have the screw style standard quick release hubs from their wheels after they’ve upgraded to a different model, such as switching to the new TM quick release/ t598 800 style? I bought some add on wheels from a seller but it turned out he’d switched their connectors to a different quick release model and my T300 base is still the same. TIA

So, I've just received my package with this wheel as a gift. Yesterday, when I've used it for the first time, everything was perfectly fine. But now + encoder stopped working. You can see, that neither the wheel, nor the driver detects it.

Now, I think it's important to mention, that it does eventually detect it. It can happen, that it detects it like 10-20 times and then stopps. But that's rare, so that leaves me with idea, that some wire connection is off.

Any ides, what's wrong and how I can fix it?

I have a t300 Rs gt with it's base Pedals
Outside of more buttons and it's looks is it worth it?
It's 260$ rn

If I connect my t150 tonthe PC, it ist starting calibration but it will not move untill I give it a light push to the left, than it turns to the most left position and stops. again I have to push it a little bit, but now clockwise. it rotates to the must right position and after that it goes in central position. ready to drive. No more pushes needed.

does anyone have a clue? I realy do not know what the issue is...

Ive had this for just over a month, and this specific problem started maybe a week and a half ago... There's a split second where the base doesn't think its there and then I have to re-calibrate the dead zones on the pedals. And it happens on snowrunner too, not just forza. I checked the pins on the back of the wheel and everything looks good. All cables are secured.

Sur tout les jeux tel que gt7 wrc etc sur ps5 comment pouvoir recalibrer ces pedales ?

For context, I had my T248 in storage on a shelf on my desk for about two months in those two months, it fell off the shelf, maybe twice and I believe it was plugged in for the entire time. It was sitting around. I really wanted to get back into playing my favourite video game and I went to go get my steering wheel and it did not power on at all. I had my wallet connected to the proper port. I had the USB plugged into my motherboard into the proper port and I had my pedals plugged into the back of the steering wheel and still all black. No USB connection sound no spinning of the motor completely nothing I took apart the backside of the wheel and nothing seems out of the ordinary. There’s nothing that jumps out at me. I don’t know if this is a minor problem a common problem or a pretty bad problem, but I really just wanna play my winter car with a steering wheel. Any help is appreciated.

Hi i just installed mod to my T3PA pedals with rubber instead of springs and my accelerator wont go past 40-50% when fully pressed, clutch and brake works fine its just accelerator problem. Attaching video clip from thrustmaster control panel.

The setting was in system settings for hdmi (enable HDCP) i was racing and i wanted to listen to spotify and it said i cant bc of said setting so i went to turn it back on then i find out that my wheel as been disconnected by it the description of the setting is “if you turn off this setting, some games and apps cant be used”

I know that the t300 (non Ferrari Alcantara) isn’t listed on the official list but I find some conflicting information and want to confirm. I’ve ordered a t598 base and adapter but if the upgrade also works, I’d like to go that route. Does any know know? It appears similar with the 3 screws back off the wheel though the din for the connector looks awkward to manipulate.

Anyone have experienced success with the upgrade on the t300 wheel. Specifically the RS GT and the upgrade or do I need to stick with the adapter plan?

TIA!

How I can change the USB port of the T128?

Hi Guys I bought T598 when ever I enter the Horizon play or rivals mode the ghost car at the start drifts to left and no FORCE FEEDBACK any solution for it pls advise.

I just bought this T598 and overall I'm pretty happy with it. This is my first wheel. This includes 2 pedals, and out of the box they are installed in the gas and clutch positions. This feels terrible in use, since that's not where a brake pedal should be. So when I was done playing, I moved the brake pedal into the proper position. Except now the whole platform wobbles as there is nothing holding up the left edge.

I've tried looking for some kind of spacer I could print with my 3D printer, but haven't found anything. If I had to model one, it'd be a pretty simple brick with some screw holes. But I'm curious what the recommended solution is. I can't be the first with this problem.

I suppose I could also move the brake so it's one column of screws from the left, and the gas one column from the right. That would balance it, but leave a column of screws between the gas and brake. Wouldn't be perfect, but better than 3 columns between them.

LEDS on my brand new wheel don’t even turn on most aren’t even working

I’d really appreciate some help with this! I bought T598 for my son’s birthday from eBay, put it all together and connected it, it doesn’t calibrate (not sure if it’s supposed to?) all turns on fine but when I move the wheel a little is spins a bit, shakes and then locks up. Is it knackered or am I doing something wrong?

Hi

I have a brand new thrustmaster Airbust edition joystick.

Latest firmware updated.

win 11 + MSF2024

It has worked fine for two weeks but yesterday I opened the game as usual and the axis X and Y were completely misconfigurated. I opened joy.cpl and I see that even if the joystick is completely centered it is showing the cross (that is supposed to be centered) missplaced at the bottom left corner and when I move the joystick it doesnt move where it should. I need to recalibrate it but I can't find any option to do it.

So I've tried to unplug and plug the joystick to different usb ports, I've reinstalled the drivers, also reboot the computer several times. Nothing works...

Im getting desperate ....

Please help!

---------------------------------------------

EDIT. I found a solution...

1. uninstall any thrustmaster software

2. press Win+R and type "joy.cpl"

3. it will appear an option to recalibrate the axis

Hi

I I’m not sure if this is the correct sub read it but this may be in relation with the pedals on a T5 98 is is that on the old F1 games such as 2021 and 2020 when I pressed down the accelerator halfway the game registered as full acceleration even though it’s not fully down there is there a way I can recalibrate it so that you can match the amount of throttle input as it is in the game or is it a problem or setting in the game? I can do? I hope the video explains it better.

Hello peoples I’m wondering if anyone can give me an idea as to why when I play f126 or any sim game my accelerator pedal is constantly on even when not pressing the pedal I’ve tried a factory reset that hasn’t worked, tried unplugging the wires blowing into the wheelbase connections that hasn’t worked, I had a few power cuts in the space of 5 minutes and since then it hasn’t worked properly, if anyone can give me an idea it would be much appreciated thank you