Got done with some late night muzzle attack training so we snapped a pic before heading in. Let’s see some photos of those fur missiles under nods!

Bought Gen 2+ night vision from Ali Baba. For $1500, I’m pretty happy with my purchase. Lindu Optics LD-NVM18. Sorry for the potato pics. My first time using night vision/trying to take photos thru the toob.Pictures do not do its justice. Way more clear in person.

Probably not the greatest financial decision in the world, but I really appreciate just how compact and light it supposedly is.

Literally about half a pound.

3.8 inches long, just like other things in my life. (Average btw)

Found this kit at a thrift shop for an absolute steal. I didn’t know much about it when I bought it, and the information I found online wasn’t very helpful, so I figured I’d ask the experts here.
It’s missing the battery cap and the rubber eyecups, but otherwise it seems to be in decent shape. I was thinking of temporarily hotwiring it just to see if it powers on, but before I do anything that might damage it, I wanted to ask a few questions:

Is there anything I should check before trying to power it up?

Does anyone know what voltage or battery it originally used?

Are there any common issues or things I should avoid with these units?

Any tips on testing it safely or restoring it would be greatly appreciated.
I’m completely new to night vision, so any advice or information about this model would help a lot. Thanks!

Can anyone help I'm trying to work out if these are anvis lenses?? they did have a filter over them that I removed the diameter of the actual lens is quite small and I'm trying to work out if that would affect performance of a tube due to not letting enough light in? Cheers

Just got in my first toobs in a aeon anvg. I'm looking for both front and back sac lenses to keep them safe, I'm a little confused from looking online what to buy to accomplish that?

Pvs 14 WF 2400FOM

Some footage from earlier this year, shooting an AXSR 20" .300NM with HISS-XLR on heated IPSC steel at 1331 yards. Wind was very tricky - normally the kind of shot that can be made cold in one or two tries, but highly variable wind between shooter & target complicated the shots. Sometimes hits were made with 2 mils of wind, others -1 mil, etc.

Pvs 14 WF 2400 FOM

Looking for Anvis 9 front and rear lenses
I’m located in Germany

Death Ray Designs has started our trial run of the Universal Helmet Power Solution. 12x units, 10x for the public and 2x for media. If you're an influencer/guntuber, we would love to start a dialog.

Our battery pack offers:

• USB-C recharging
• Solar panel support
• USB-A for peripherals (recorders, thermals...)
• 3x PVS31 AA-pack battery life on a single charge

Drop coming soon, follow us on instagram at DeathRayDesignsLLC or check out our site at www.deathraydesignsllc.com

aeon anvb with nnvt

New to night vision I just picked up a pvs 14 gen 3 and a flir breach thermal as well as a Wilcox mount. I’m not familiar with bridges, any suggestions on what bridge and attachments I need to secure both would be greatly appreciated thermal right eye pvs left.

Sorry for mess

Recently ran a few drills with some buddies specifically working on administrative and medical tasks sprinkled in with the courses of fire.

Specifically this drill where you had to apply a Tourniquet to a randomly selected leg and then finish the course with the TQ attached.

Another drill we ran was the shooter had to load several rounds into a magazine, load the weapon and then advance to the targets.

Super fun and really helps you learn how to work through small tasks in low light/under nods.

Anyone have drills similar to this? I’m open to sharing mine in more detail!

I’ve been doing a bit of work to construct my own monocular set up, but I’m at an impasse because I’m not sure the intensifier tube I want to go. Kind of on a budget, but I’m looking for the non-standard sizes that come in under budget, but still get the job done. Any recommendations?

Hi everyone,

We're the official PARD USA team, and we're excited to finally join Reddit.

We've been spending a lot of time reading discussions here over the past few months, and honestly, we've learned a lot from this community. It's one of the few places where people openly share real field experience, honest opinions, and constructive criticism.

This year marks a new chapter for PARD USA.

Some of you may already know our brand, and some of you may have used our products before. We know there are things we've done well, and there are also areas where we can do better.

We're here to listen. Your feedback whether positive or criticalhelps us improve, and we'll take it seriously as we continue building PARD USA.

You'll also see more from us this year, including new products, more real world field content, and a stronger focus on supporting the hunting and night vision community. We hope to earn your trust through our actions rather than our words.

This account isn't here just to promote products.

We're here to answer questions, participate in discussions, and listen to the community.

Whether you've used PARD before or are simply curious about what we do, we'd love to hear from you.

Thanks for having us here！We're looking forward to being part of the conversation.

- The PARD USA Team

Hey folks,

So I have the opportunity to use a private range to facilitate an NVG Course of fire beginners course. I am asking for input on the stages of fire we should host for the training.

I myself have been shooting under NVGs for about 100 hours over the last few months, but have yet to host multiple fundamentals for shooters.

I have some basic ideas of what the stages would be but would like to hear opinions from others WHO HAVE SHOT REGULARLY under nods. Entire course of fire will focus on rifle fundamentals under NVGs.

Course of fire so far:
1. Mozambique drill at 10 yards low ready. Emphasis on acquiring sight picture on target, and understanding dynamics of shooting under NVGs with orientation around rifle platform.

1. Mozambique drill, 1 shoot, two no shoots. The shoot and no shoots will be wearing generic clothing, RSO will call the shoots shirt color/pattern, shooter must turn, identify shoots no shoots, and properly engage appropriate targets. Will test target identification and recognition under nods.

2. Mozambique drill, 2 shoots, offset light. Test the shooters ability to overcome potential flash disorientation from antagonist using white light. Won't shine directly, but at an offset to get shooters familiar with working around antagonistic white light

3. Mozambique drill, 2 shoots, barricade and barrels, test shooters maneuvability and peripheral awareness with obstacles while under nods.

If you see areas of improvement or potential scenarios fixated on practicality, please let share!

I'm fairly new to NV and want to get either a PVS14 mono or bino setup. I'm here quite often, learning from the introduction posts and observing setups and concerns for NV from other Redditors. So I thought it would be best to join the Discord to get more immersed before I invest. Took the Exam and was rejected twice. Could y'all help me understand what I missed and got wrong? Thank you!

Here's my answers to the questions from my 2nd rejection:

1. Okay, lets try this again. I found the link to the server from the official r/NightVision. I need GPNVG to deal with nocturnal pests in TX
2. SNR, Resolution, Equivalent Background Illumination, Halo, Gain (lum. gain)
3. objective lens, photocathode, microchannel plate, phosphor screen, fiber optic inverter, eyepiece
4. Digital devices are inferior because they have latency, poor low light capabilities, shorter battery life, terrible depth perception
5. short for omnibus -contracts for gen 3 made by elbit and L3 -omni designation identifies the contract generation not the exact performance of the tube

Pictures of my nightvision urbex setup taken with my crappy 9 year old phone, gotta have your priorities straight :)

Are these some Niche Fusion devices or just props for the movie? Cool to look at either way.