I'm looking to have a 2p inner version of the X-Dome 1+ made, basically filling in the vestibule with interior instead. I love the tent but it's just a tad too small inside and would be much better if it was a normal rectangular inner! I also want to sew a zipper on the back wall so there are two identical doors, which I'd like to have done though I may be able to do it myself. If there is somwhere I could go that could do this, that would be welcome as well!

I'm not sure exactly what I'm looking for here, I'm sort of trying to get an idea. Basically just trying to do a 1:1 copy of stock fly. I have a copper spur ul2, (pictured, as well as an older model I need to repair the pole on, that I would like to do this for as well at some point but, the one pictured is the current one) that I wanted to try and make a polyester fly for, mainly because I really prefer the non sag attributes. But, after looking into it, I don't know that I'd be capable of handling such a task on my own and thought it'd be worth a try to see what others have to say! Sorry if this doesnt fit the normal criteria! I was sent here from another sub! The fabric is a bit expensive so I'd rather someone who knows what they're doing handle it than me, but i could probably do the little stuff like guyout points and door toggles, but the main cutting and sewing of the fly is a bit daunting!

Hello! I am looking to commission a custom, lightweight, everyday carry (EDC) backpack. I am located in Arkansas, USA. I have a healthy budget of $500 for this project and a flexible timeline, as this is a personal passion project.

Because I want to minimize weight as much as possible, my goal is to make this out of Dyneema Composite Fabric (DCF) or a similar high-performance laminate. I currently do not have physical patterns or sketches, so I am looking for a maker who can either help me pattern this from scratch or adapt an existing simple daypack pattern they already use.

Here are the target specifications:

• Capacity: 25 to 30 Liters (simple, clean everyday backpack style).
• Torso Size: 19.75 inches.
• Primary Material: Dyneema Composite Fabric (e.g., 2.92 oz or 5.0 oz DCF Hybrid for durability).
• Waterproofing: I would highly prefer a fully waterproof, seam-taped or seam-sealed interior.
• Shoulder Straps: Lightly padded and ergonomic to support daily carry weights.
• Main Feature: A suspended laptop sleeve on the interior back panel to protect my computer from drops.

Since my budget is $500, it should comfortably cover the raw Dyneema and specialized hardware costs (typically $100–$150) while leaving a fair rate for your labor.

If you are interested or have a similar base pattern we could modify, please send me a PM with some examples of your previous work. Thank you!

Older version I inherited had a zip off bag, has since been lost. Looking to get one built/upgraded. Can map out the U-shaped zipper and send ample pictures. Here is info on the OEM one:

Capacity: 11 L
Weight: 0.62 lb (280 g)
Exterior dimensions:
14 in H
11 in W
6 in D
Fabric:
Main: 210D Nylon Shadow Box
Accent: 400HD Nylon Packcloth
Bottom: 420HD Nylon Packcloth
The manual also states it has:
Large main compartment
Front stretch mesh pocket
Zipper attachment to the Poco Premium/Plus carrier.

This is just for context of size and shape. Doesn’t need to conform to original size, just that it zips in.

Can workout price, not too worried, obviously not gonna spend more than a new one would cost. Think there is reasonable middle ground?
Would like to get it done soon so I can enjoy it during my son’s first summer.

Thank you!

Have a design floating in my head to solve current annoyances with fly fishing backpacks across multiple brands and want to make that a reality.

The cost is the cost, don’t really care about that. Would like within the next 6-9 months.

Hello,I am looking to commission a custom-built, premium dome-style hot tent. Since I cannot find these specific dimensions in serial production, I would like to know if you can take on this project and provide a rough price/timeline estimate.Project Specifications:Design: Dome style (free-standing or semi-freestanding preferred).Outer Tent: Floorless design made of Dyneema Composite Fabric (DCF). Peak height must be exactly 200 cm (2 meters) to allow standing upright. The pitch must allow some height/tension adjustability for uneven terrain.Inner Tent: A detachable 1-person inner mesh tent with a bathtub floor (purely for sleeping, height is not important).Poles: High-strength aluminum poles (e.g., DAC Featherlite NSL or Easton 7075-T9) to withstand wind load at 2m height.Features: Integrated fire-retardant stove jack for a titanium wood stove, and robust tie-out points.Could you please let me know if this is feasible for your workshop, along with a rough estimate for materials and craftsmanship?

Best regards,

Ruhan Akyurek

I’m looking to commission an ultralight in cabin dog carrier with dimensions of 23cm x 30cm x 40cm that I’d like to be under 0.5kg. I’m happy to pay whatever it costs for someone who is capable of doing this.

I was thinking it could be made of ultra PE fabric or something comparable and have a rigid frame of titanium or similar, but I’m open to any design and materials that would make this possible.

I’m happy to answer any questions and discuss further with anyone who might be interested in taking it on. Thanks for your consideration!

Project

• Pattern: https://www.wafflepatterns.com/product-page/pinguin-accessory-bag
• Note: slight modification to increase internal pocket space

Material

• Main fabric: cotton canvas with interfacing so it can stand on its own
• Lining: quilting cotton

Price

• I'm not sure how much it should cost, just walk me through the price

Timeline

• No rush, just provide updates so I know it's being worked on.

Project: I am looking to commission a custom front-pocket cardholder. I want to replicate the layout of an old Barneys New York wallet but using technical fabrics. The image here is another brand's rendition of the same design.

Layout Specifications:

Material Requirements:

I want it to match the Slate (greenish-grey), grey, or navy material used in Pioneer Carry wallets (which is a 3-ply high-density nylon ripstop with a matte finish). I am looking for a maker who can source an equivalent fabric like Challenge ECOPAK EPLX or a matte PU-coated ripstop nylon.

Budget/Timeline:

I am flexible depending on the cost of sourcing the specific material. Not in a huge rush for delivery.

Please let me know if this is something you can build and we can work out the details!

I recently bought a Ascend H10 kayak 2018 on facebook marketplace. The guy I got it from somehow threw out the splash cover for the front of the boat. Which i think it just looks better with both on. I contacted the company and they quoted me a lot of money for the whole outfitting kit.

I was thinking someone would be interested in talking a contract to sew a mesh cover for this. I have the stern (back cover) just need the bow (front) also theres saddle bags that clip on the boat that are missing which could be another project too.
Id be happy to send dimensions but you might have to do a bit of research on what it should look like on the H10 boat etc.

Im happy to pay for it all. Located in Ontario Canada. Don’t want it to cost a fortune is all.

Let me know if you would be intere

Hi everyone — I’m looking to commission a 1–2 piece prototype of a vintage-style Sailing/fishing cap

The project is a soft, unstructured cap with a cream/off-white cotton or canvas crown and an oversized green crushable bill. I’m trying to recreate the feel of an older fishing hat, but with a very specific wide bill shape and soft outdoor-friendly construction.

The most important part of the project is the bill. I do not want a normal baseball-cap insert, cardboard, or hard plastic. I’m looking for something soft, flexible, and crushable that can still recover its shape after being bent or getting wet.

Approximate finished bill measurements:

• 4.5 inches long from crown seam to front edge
• 9 inches maximum width at the widest point
• 7.5 inches wide at the crown/base seam
• Around 8.5 inches wide at the front edge

Desired bill construction:

• Dark/forest green outer fabric
• Soft closed-cell EVA foam or closed-cell neoprene foam core, approximately 1/4 inch thick
• Bound edge
• 3 lengthwise stitched channels
• 3 subtle cross-stitches across the bill
• No hard insert
• Fully crushable/flexible
• Water-resistant enough that the bill does not absorb water, warp, or break down

Crown details:

• Cream or off-white cotton/canvas
• Breathable and lightly to completely unstructured
• 6-panel or similar classic cap shape
• Adjustable rear strap with a plastic buckle or snap closure
• Green eyelets/button are fine, but not required

I have reference images/spec sheet visuals that show the shape, stitching layout, and proportions. I’m not looking for mass production yet — just someone who can help make a clean functional prototype and advise if the foam/material choice needs to be adjusted.

This seems closer to a small soft-goods/MYOG build than a standard hat manufacturing job, so I’m hoping someone here with experience sewing outdoor gear, foam, binding, and structured-but-soft pieces might be interested.

Please message me if this is something you’d be open to quoting, or if you have suggestions on materials/construction.

[COMISSION][USA California][$300][3 months]

### PROJECT OVERVIEW: CUSTOM COMPACT HORIZONTAL CONVERTIBLE TOTE-BACKPACK

**Design Inspiration:** Tailored explicitly around the flared silhouette, tapering, and horizontal lines of the Pond LA Oxford Fabric Transform Tote Air Edition and anello 3in1 convertible horizontal backpack

1. FORM FACTOR & EXACT DIMENSIONS
   * Silhouette: Structured horizontal profile . open to both flared and rectangle profiles
   * Top Width: 14-16 inches.
   * Bottom Base Width: at least 13.5 inches.
   * Height: 11.5 inches.
   * Base Depth: 7 inches (ensures a sturdy, wide, non-tipping footprint).
   * Total Weight Target: Under 2.5 lbs when empty .

2. MATERIALS, CLOSURE, & HARDWARE (HIGHLY WATERPROOF DESIGN)
   * Exterior Fabric: Lightweight, water-resistant. material candidates: Nylon e.g., 420D Robic or Cordura or 1200D oxford polyester.
   * Exterior Color: Navy
   * Interior Lining: High-visibility light-colored fabric (e.g., light gray, cream, or beige) to easily see contents inside.
   * Main Closure System:
   - Dual Waterproof Zippers: A premium water-resistant zipper track (e.g., YKK AquaGuard) spanning the entire 16-inch opening, utilizing TWO zipper sliders meeting in the middle for dual-directional access.
   - Zero-Gap at zipper ends: zero gaps between the ends of zipper. the transform tote zipper doesn't span the complete width of the bag, so has entry points for water when the zipper is closed which is annoying.
   - Possible Gated/Framed Opening: (preferred but not required) Built-in internal metal stay bars (hinged doctor's bag/gate style frame) that pop and hold the bag wide open for easy loading.
   * Base Protection: Reinforced bottom panel equipped with 4 or 5 metal protective feet.
   * Hardware Accents: Premium metal accents and durable hardware matching the metal feet.

3. STRAP & TRAVEL MECHANICS (ANTI-INTERFERENCE DESIGN)
   * Tote Straps: Permanently attached over-the-shoulder tote handles with a fixed 10.5" to 11" drop height.
   * Backpack Straps: Premium, comfortably padded, ergonomically shaped backpack straps mounted at correct anatomical shoulder-width positions. Also at correct heights that don't make the bag sit weird angle/height on the back (a problem with the transform tote)
   * Travel Integration: A heavy-duty luggage trolley sleeve sewn horizontally onto the back panel.
   * The backpack straps must not block, crowd, or jam the trolley sleeve when sliding the bag onto a luggage handle. (another problem with transform tote).

4. EXTERIOR FEATURES
   * Front Storage: 1-2 dedicated external pockets on the front of the bag with a secure zipper closure for quick-access items.
   * Hydration: Dual external water bottle pockets integrated cleanly on the short side panels.

5. INTERNAL ORGANIZATION
   * Laptop Pocket: A dedicated, padded internal compartment safely suspending and horizontally fitting a 14" laptop.
   * Security Pocket: One internal zippered pocket for loose essentials and valuables.
   * 2 non zippered pockets
   ------------

Hello! In my search for a perfect chalk bag for rock climbing I’ve come across the product in the pictures attached.

The features that I really like are: the roll top magnetic closure, tape loop, cord to carry additional shoes on the bottom, multiple loops/carry options such as open flaps for phones and brushes, and a zipper pocket.

What doesn’t really matter to me: high tech/expensive fabric. I’d like it to last me a while but I climb indoors so it doesn’t need to endure a beating. Waterproofing isn’t that big of a deal either, but a quality zipper would be great as well as preventing chalk from falling out in case it tips over. Color isn’t a big selling point. I’m ok with pretty much anything, black would be nice though.

Problem and why I’m commissioning: they’re almost always sold out, it’s a bit above my budget, and I’m assuming the shipping would be expensive as it’s international.

Edit: maker found, project commissioned. Thank you all!

Hello, I had the idea for this belt pouch a few years ago as an upgrade to one I have been using for years that is now needing replacement. The design is somewhat complex, thus when I attempted to stitch it myself, the results were decidedly sub par. I have and will supply the majority of the materials including technical fabrics, zipper, thread, etc. As this is an upgrade from a parent design, I will send the original pouch for examination as well.

The design can be viewed here: https://docs.google.com/presentation/d/1o2lox0dR-PkCsNIB7nfduAaArRJLP8Ju/copy

Given the complexity of the project and skill required, I'm thinking ~150$ plus return shipping.

Please message or comment if you are interested in discussing this project! Happy to discuss additional details.

Hi all — looking to commission a classic men's crew neck sweatshirt in a specific technical fabric. Ideally looking for a US-based maker who can source the fabric domestically.

What I'm after: A relaxed-fit men's crew neck sweatshirt replicating the Swrve _BLK Polartec Heritage Fleece Pullover (2016) — a limited run piece that's long discontinued. Reference photos and review here: https://www.lifeinthesaddle.cc/2016/10/review-swrve-blk-polartec-heritage.html

Classic athletic sweatshirt silhouette — set-in sleeves, V-insert at the neck, ribbed cuffs, collar and hem. No hood, no zip, no pockets.

Fabric: Seal Gray Polartec Thermal Pro Pique Textured Sweater Fleece from Surge Fabric Shop (surgefabricshop.com). Pique texture on the outside, soft sherpa fleece on the inside. 310gsm, 100% polyester, 66/68" wide, 25% horizontal stretch, 0% vertical. $19.99/yard.

Pattern: Happy for the maker to select whichever men's crew neck pattern they feel is best suited to this fabric and silhouette, based on the reference images above.

Location: I'm based in London, UK — happy to cover international shipping from the US.

Budget: Open to reasonable quotes for a single garment commission in technical fleece.

Please DM with any questions or to discuss. Thanks.

I am looking to have made a few lightweight seats, much like this one:
https://backpackinglight.com/forums/topic/diy-7-oz-comfy-ground-chair/

This is a 210D build with some mesh in the back to save weight and tent poles for rigidity.
I am open to discussing materials and colors; It's not very important to me. I just want it to work.

Hello! I’m hoping someone here might have the skills, or know someone, who could help with a really special custom project.

Backstory:
My grandpa passed away in 2004 after a sudden cancer diagnosis. He served in the military, and a few years ago I was given a box of his belongings, including two military-issued duffel bags. I’ve held onto them ever since, trying to figure out a meaningful way to use them.

The idea:
I’d love to repurpose the material into an everyday tote bag, something functional but still honoring where it came from. Ideally, it would have a few compartments for organizing smaller items, space for a laptop, and be durable enough for things like groceries or farmers market runs.

I don’t have the skills or equipment to make this myself, so I wanted to put some feelers out. If you do custom sewing/leatherwork/gear projects, or know someone who does, I’d really appreciate any leads.

Thanks so much!

So this design came from a very specific use case request for someone wanting a tighter bag with all the useful and critical features.

This sling was built around that use case and comes with:

- Velcro patch.

- Strong internal organization with slots for first aid kits and medicines.

- Quick-snap detachable magnetic pouch for gloves or small essentials that need to be kept separate.

- Velcro-detachable waterproof pouch for wet or used bandages or anything that needs isolation.

- A separate padded organizer cube for delicate items

MOLLE webbing for additional attachments.

- Clamshell-style opening with a dedicated section for clothing, separated by a panel.

- A sleeve for a water bladder or other flat items.

- Cord attachment points to secure essential items during urgency.

Every inch of this bag was designed around practicality, utility, and flexibility. It packs more than its stated capacity.

Hello! I am looking for someone that can make me a skirt. More specifically a gathered A-line maxi skirt. I have a skirt that I want to be made similarly to it, but in the color black and longer length. Thank you!

Looking for a green waxed canvas carrier for my 40oz Thermos King Vacuum bottle, simple flap style with a shoulder strap similar to this one https://hypebeast.com/2011/8/filson-x-stanley-bottle-and-carrier-combo but prefer a snap closure instead of velcro.

Looking for someone to make after market adjustments to an ultragrid pack. Reduce extension collar length and convert from dry bag to draw string closure.

Ultralight backpack

Budget is negotiable.

I have an idea for a backpack and I’m looking for someone to help me bring it to life. I will be using an existing frame so this is truly just the pack (no shoulder straps, frame, hip belt, etc).

My preference is Ultragrid or comparable, and a more durable fabric (maybe 500d cordura) for the bottom panel. 60L, traditional UL design with stretch side pockets, stretch front panel pocket, one interior pocket accessible via water tight zipper on front panel, roll top.

Basically a standard UL pack but I have a few very specific requirements.

Thanks!