Adding mostly for people to reference in the future. I couldn’t find this config in any photos.
4 in ILWT barrel and YHM R9. Using the factory direct thread adapter for the R9 gets it was down there. The factory rail doesn’t touch the can, but just barely, the Mlok is useless. Probably going to pick up a lunar concepts hot pocket.

Has anyone got this setup and got it to work? If so can I pick your brain for a second in DMs and I’ll pay for your time.

Currently running a MWI handguard, but looking to switch things up a bit. I've done a lot of searching that says the samson will not but the lancer will, but has anyone actually tried it? Particularly curious if the handguard will fit with the longshot rail attached.

Vertx bag, as you can see the lower half is hook and loop material. Trying to find a good way to attach it to the Velcro to keep it more secure in the backpack. I’d love to hear some ideas. Don’t have a preference if it goes barrel down or up, want to hear it all. Thanks!

~$250 is crazy for the two railed one. Thanks!

Got the suppressor finalized today. Went with yhm r9. And the rest of the goodies. Very happy with how it turned out. Waiting on a few more odds and ends

Seems like they’re good for a range day and break. Any actual good experiences? Over 1k on my kuna / lingle and has been flawless. I’m thinking of passing my bad research into another person since it hasn’t been used yet.

Looking to get a better sight later on when EOTECH puts out their new shake to wake holo.

MPX-K 4.5” barrel
HUXWRX 9K Ti (mini stiction and mini hub mount)
Olight Odin GL M flash light and laser
Vortex Cross fire red dot
Sig barricade hand stop

Recently, I installed an FRT in my MCX, which I removed my Geissele MCX trigger. I was wanting to try to put my Geissele MCX trigger into my MPX. I know Geissele makes a trigger designated for the MPX. On the Geissele site both of the triggers look very similar but MPX trigger comes with extra springs. Has anyone tried this or know if it will work?

Is this normal wear on the AS designs slip trip? top surface started getting a burr that I filed out. probably only 100ish rounds through it.

I gotta say that I wasn’t anywhere near impressed. The felt recoil was almost as much as my CZ Scorpion used to make, but at a much higher price. I feel bad for anyone who bought one of these at full pop when they first came out.

While doing some slow fire off the bench today. My ILWT (In Lead We Trust)navy tri-lug adapter that I bought back in 2017 and probably have aprx 5k rounds through. Snapped in two. Not sure how to proceed from here, should I get a new adapter? Does anyone else make one? Not sure I want to buy from ILWT again.

Another interesting issue. I haven't had the barrel exposed in nearly 10 years, it looks like the barrel has a "bur" (area where the barrel ends just past the factory threads on the end of it that isn't normal looking)and I can't recall if it had that before I put the adapter on there. I tried cleaning it up in case it was carbon buildup, but it's part of the barrel, almost like it wasn't cut off flush.

Anyone with a Gen 2 keymod MPX who can check their barrel?

I’m looking for something compact with at least 800 lumens or better. Thanks in advance.

Very similar builds, unsuppressed 4.5” barrel versus 4.5” suppressed, was a blast going through a bit of ammo. When we weren’t shooting together, no ear pro was needed with the can even with supers. Hell of a gun for sure.

I have a 6” barrel MPX with the factory 8” handguard (currently with a faux suppressor attached) and I’m looking for a good, tuckable suppressor with a good mix of solid suppression and low back pressure so there will be less gas. The RXD is fairly new so there isn’t a lot of videos on it and the few that are show guns with the suppressor or MP5s. I know this can is also rated for 10mm which I don’t need, but I do want it to work on my Marlin 1894 in 357mag/38spl along with my MPX. I hear it has the same tech as the Mojave 9 which I’ve heard recommended sometimes for the MPX. I may end up using this can on my threaded pistols, but it will be primarily for the MPX and the lever action so don’t really need the modularity of the Mojave.

Has anyone tried this with their MPX?

This is my first ever PCC and first time using everything on the gun. I was blown away by how nice the trigger is and how accurate this thing shoots!

I had frequent malfunctions for the first 100 rounds with the PTR Vent 2. The owner at the shop told me this is a common issue with titanium 3D printed can. He cleaned it twice for me and after I shot 100 rounds seems shoots smoothly without malfunction now. I will definitely shoot more to make sure it’s truly working without any issues.

I was gonna order the 8inches hand guard initially. However, I actually love how this thing looks now.

I am thinking adding a remote pad switch and a laser in the future.

I’ve seen lots of mixed feelings on tri lug adapters. I run tri lug on my mp5 and I’d like to do it on the MPX. Is the ILWT HK style navy tri lug one of the ones that doesn’t have accuracy issues? It has the 25 degree taper in it to avoid having to use a taper adapter, which I’ve heard seems to be the root of the issues when using a tri lug on this platform.

What is the best fitting light mount for a Midwest hand guard? I have a mod light scout body and the angle on my offset mount from Arisaka is too acute to fit right

Really wanna get into an MPX K but want to save some bread and find a used one. Whats a good price on one? Looking for as stock configuration as possible. I’ve seen listings of used ones going for almost new prices, has it always been like that?

Hi all, I recently received a Form 1 disapproval due to "MODEL MUST MATCH ENGRAVING AS IT APPEARS ON LOWER SIG MPX."

Do I need to include every single engraved text on the lower in section 4.h? SN, Sig MPX, Multi-cal, address, and the SBR engraving?

Just picked up this MPX (my first PCC) from a local online auction. Learning a bit more about the operating system, accessories and so on. Excited to get to shooting it soon.

I am puzzled by one detail thought that I’m not having much luck in finding in videos of takedowns or reviews etc. The lower receiver has a button high and to the rear, right in front of the side-folding brace mount. Can anyone advise what it is and its function?

Any other details, generation/model/options you know just from the photo would be appreciated.