Both GBB

Agilite gun belt + bcm gm mws + vfc g19.5

Handguard from hao, receiver set from guns modify, all guns modify internals, surefire rc2 w/ tracer from atlas custom works. Arc division reactor slide kit for the Glock.

Top: WA Wilson Tactical Supergrade All Black

• 2010-11 End-year and New Year Special: Limited Edition 28 pieces
• SCW3, fixed hop barrel
• HW slide and frame with fluoropolymer coating, black finish
• HW starburst grips
• serrated mag release
• old style slide top serrations (some pieces of this batch got newer style flat top serrations and serrated back of the slide)

Bottom: WA Wilson Combat Tactical Supergrade

• 2006 release
• SCW2, variable hop barrel
• HW slide and frame with fluoropolymer coating - black slide and blue-grey frame finish
• checkered mag release
• lost wax cast hammer, sear and disconnector with factory custom tuning
• black nickel plated inner barrel
• stock wood-grain plastic grips replaced with Wilson Combat French walnut double diamond grips with two tone medallions

EMG - TTI Glock 17 Combat Master (Ballerina)

I have my salvo precision Mcx Spear Lt, my salvo precision Mcx rattler, and my double eagle Noveske n4. They are all under the TM MWS GBBR system

Hello I’ve tried both 1.27mm and 1.5mm hex keys on this and neither have fit, is this a pin? Thinking about just hack sawing off the flash hider.

Got the new KWA TAC9 thinking it shot indoor fps. Its shooting 1.4j. Is there a way to lower the fps, I don’t think theres a low fps bolt for it yet

Jag Arms Sand Viper High Grade
AEX RMR
DCI Guns RMR Protector
Braun Lights Weapon Light

I'm a CGS user but it's calling my attention to buy a Ghk v2 that they sell in evike I'm not upset with CGS on the contrary I want to buy the M723 but the GHK catches my attention will it be worth it or not? I listen to your opinions, thank you very much

Build List:
Laylax Nitro M870 Rail
ITP M870 Thread Adapter
ITP JKA Suppressor/Tracer
Tokyo Marui Micro Pro Sight
Stippling
Multicam Black Receiver Cerakote
“Crushed Silver” Barrel Cerakote
Tokyo Marui Full Sized M870 Stock!

Magrelease won‘t work properly. Any ideas?

Gonna be honest, I prefer L403 more on field. 😂 But L85 still one of the UK classic 👌🏻

Cag parts and obi-wan nairobi optic setup inspired.

My TM G18C was bought secondhand and has been used for about a year. Recently, it started having problems with the nozzle not securing to the hop-up rubber band, and it's also experiencing bursts and cartridge jamming. The aluminum alloy slide sleeve I'm currently using is of unknown origin, and the rear of the nozzle housing inside is severely deformed. Based on this, I purchased a Guarder nozzle housing for TM G18C (18G), but found it can't be directly installed into this slide sleeve. Also, this morning when I disassembled the unit, the hammer, which should be made of zinc alloy, burst. Furthermore, there are increasingly fewer TM G18C aftermarket parts (or replacement parts) on the market, especially Guarder slide sleeves. Should I get it repaired? (Cow-coated nozzle, Unicorn hop-up rubber (70 degrees), TTI barrel & hop-up chamber)

I recently got two of those for kegging and then realized that my batches didn’t warrant a keg so I was looking into interfacing with a KWA ATP, figured tethered mags would be faster than manually reloading its reservoir

Swapped out the quad rail for a lighter mlok, figuring out which I like more, the black on tan base or tan on black base.

Holy Warrior S1 replicas, other furniture is also replica.

First GBBR and I'm hooked!

Am I in disadvantage (especially in the open)? Yes. But bro, feeling during shooting is FIRE!

Parts and accessories list:

• Double Eagle Ghetto Blaster 7,94" (of course)
• DE Stanag Mags with OG Magpuls and ali .300 Blackout bands
• Also I'm testing EMG Lancer L5 mag, no issues so far

Insides:

• Maple Leaf rubber (don't remember which one, sorry) and Omega nub
• Ra-Tech NPAS
• Slong Airsoft steel buffer
• Weaker spring from a set (I might change it, although the recoil is nice the bolt seems to bounce)

Outside:

• Eshooter Smoky BT tracer (recently with 3D printed front cap for looks and less flash)
• Vertical front grip by Idunno (looks like Magpul RVG clone)
• JJ Airsoft Mod 1 Mlok covers
• PCS QD red dot with Vector Optics lens protector
• OG Magpul MOE grip
• Recently chinese G43 magnifier with 3D printed killflash
• Direct Action Carbine Sling MK 2 with some chinese QD ring from Idunnowhere

Ghk Urgi 14.5 Glock 17 gen 5 mos

Got stuck mid game, after cleaning it seems like it’s the return spring. Even after getting the nozzle out the spring refused to budge by hand, it also took a bite out of my o-ring

Anyone have links to VFC nozzle return spring and o-ring replacements that ship to the US I only really know proaction