Looking to get this printed, preferably within the EU, ideally located in Spain for lower shipping https://github.com/unkyulee/phone-enclosure/tree/main

Thank you in advance!

I specifically need the taller variant that holds a 1ml syringe 1 inch needle

I am coming up with a design for something and I dont know where to start to even get the file, or where to go to get it printed. I have an image of something similar but I want it tailored to what I have in mind.

This design is tailored to tradesmen but I will say no more until it is all assembled the main cap is the part im having trouble coming across.

If anyone is willing to help me on a few designs and prints I could send you the finish product to test.

The picture here is similar of what I want but I want to be able to lock the pipes in place with push pins or something to keep the pipes in place.

Its a 4 point design where it will have 4 poles that will fold out flat kind of like an umbrella but as i said I want the poles to be locked or wedged in place.

This is the mod I need printed. Two because I might mess it up and it's good to have a backup. The cables that I ordered are not coming until August so I am in no hurry for shipping.

This is the file I need printed:

https://www.printables.com/model/344335-realforce-r2-pfu-detachable-usb-c-cable-mod

I had a car part (a fan shroud) designed and now need the prototype printed for test fitment. I do not wish to share a link to the file publicly as the design was paid and I am exploring selling the final product in a kit.

The part has these dimensions:

• Length: 205mm
• Width: 410mm
• Height: 62.40mm

I don't know a lot about 3d printing so I would defer to someone more knowledgeable about the appropriate material for a prototype. I just need to confirm the fitment so we can make design changes before printing the final product.

Once the prototype fitment is confirmed, the final product would need to be printed in a material that has good heat resistance and won't warp. From quick research, I think this means ASA or PA12-GF?

It would be awesome if the same person can print the prototype and the final product, but let's start with the prototype (and cheap material)!

Of course, I am happy to pay for this.

I am looking to get this printed out: https://www.thingiverse.com/thing:7384119

I would need it to be printed in something that is heat resistant as it will be sitting in a car during the hot California summers.

Prefer it to be printed in black.

Thank you to everyone who sent me estimates!

Here is the file;

https://www.printables.com/model/1731724-steam-controller-2-dual-stage-trigger-mod/remixes

I need one as shown, and a mirrored one, to go on the other side of the controller.

Hello everyone! I am looking for someone who is capable of making me some custom holders. I am looking for it to be in Red. I need 5 of them that can hold a 40mm coin, and I need 1 of them that can hold a 50mm coin.

Book Trimmer, Maker World link

Hey, I'm looking to get the 100mm version of this book trimmer printed. The latest file version is 'BookTrimmerV3'.

A price for the cost of the print, plus postage to one UK address (midlands) would be brilliant.

Thanks in advance for any help with this, much appreciated!

MakerWorld LINK

Hey ya'll! Looking to have this printed in either an FDE/ Dark Green, or really any other earth tone. I apologize, but I am completely ignorant to any, and all things 3D printing, but I am hoping to have this printed in a relatively/ thick or heavy material (if that is even possible?)

Hoping to get a price, shipped USPS to a non-rural area of Virginia! Thank you in advance!

Hello! I'd like to request printing of two e-reader projects, if possible. I'm currently based in SF/Bay Area.

I'd take what I can get, but black or pink would work best for me :) Thank you so much for your time and generosity! I really appreciate it.

1) XTEINK X4 Light Case

2) Un Kyu Lee's PDA Terminal

I've been using these RFID watchband tags from a company called Hornady. But not the actual RFID tags that Hornady provides inside as they aren't writeable.

Instead, I've used Tiny Labs Keysy stickers and putting it inside the watch band tag holder. The issue is that the stickers are too large so I have to modify them and run the risk of them being damaged and are soft stickers so they eventually wear out

I found other harder plastic RFID tags but they are slightly too big for the watchband tag holders.

What I'm looking for is someone to 3D print me 20-25 watchband tags like the attached that would securely hold the harder plastic RFID tag. I'm not sure about 3D printing materials as these are plastic and have a good amount of flex for various watch bands.

I would also be okay to ship both the tag and the watchband holder (in the US) to see it in person so that you could 3D print a larger holder for the tag.

Hello!

Looking for someone around the Seattle area/within driving distance that can help me print this case for my ereader.

https://makerworld.com/en/models/2657757-xteink-x4-full-body-case#profileId-3313183

I'll take what I can get, but if it can be multicolored / pastel colors then that would be great too!

Hello, looking to get three models printed in resin from Heroforge STL files. Resin would be ideal for detail, and local to me if possible so I don't have to worry about issues with shipping. Trying to get it before Monday of next week, but understand if that's too tight. Thank you!

The blueprints are on the Thingiverse, it's a square 92 mm to 3 inch duct adapter.

https://www.thingiverse.com/thing:2193701

This one specifically (the V2 model).

Hi everyone,

I'm looking for someone to print a bedside lamp project that consists of 3 STL files:

• Base
• Clicker
• Standard cylindrical shade

No design work is needed—I already have all the STL files.

Looking for:

• FDM printing
• White PLA (preferred)
• Good surface finish
• Ship to NYC (or local pickup if you're nearby)

Please comment before DMing (per subreddit rules).

Thanks!

Looking for someone to 3D print two of these for an old M17 gas mask in order to make it safe to wear for cosplay reasons. There would need to be two: a left and right version.
https://www.thingiverse.com/thing:6446029

I have come up with a display stand/box..thingie...that I want to use for my new dragon model.

I have a drawing...but let me elaborate.

-- I want it to be 8" wide, inside wall to inside wall

-- thinking 1/4" thick walls (maybe 1/3"?)

-- there are square "colums" set in each corner, and at mid points of side walls. They are 1/2"w x 1/2" l x 1.5" h. Basically, they are recessed down from the top of the box, allowing for an acryllic panel to rest inside and still have a lip to keep the model base in.

Smooth walls inside the box, but rocky texture on the outside. Light(ish) Grey.

Small half-circle (1/3" tall maybe?) middle of the back wall for a lighting cord.

The bottom is fully enclosed/finished, and smooth print on both sides.

I am familiar with putting together models (40k, etc) so assembly of the walls together would not be an issue :)

Seeking the chest plate to be printed to match my body, I already have the STL file

Hello all,

I have a set of plastic pickup mounting rings that are black and I'm looking to change them to a slightly off-white color of the same shape. I need two of these.

I've looked everywhere for this exact shape of pickup mounting ring, but can't find it; The rings are nothing special; pretty simple blocky shapes just like every other pickup mounting ring. It's just that I can't find a pickup mounting ring in this exact dimension in the color I want :)

I would like to send two pickup rings for the job. The black one I'm looking to recreate exactly, and a light cream-colored one that is the reference color I want the pickup made in.

It should be an easy project I think, even for a beginner? I could be wrong :)
I've also heard that PETG is the best material to 3D print pickup mounting rings out of, but I don't know anything about 3D printing, so I don't know if that's hard or not.

Please let me know if interested. Thanks!

​Looking for someone to print 2x panels in a dark grey, 2x in black. PETG and 300+mm print bed needed. Can send over an STL with print settings or send them over separately. Would love to see some of your past work as I have gotten some meh quality stuff on here.

Got a few chats. Let’s pend for now!​

I recently purchased a stroller second hand and was taking the stroller fabric off to wash it and the firm cardboard that keeps the seat in place when the toddler is sitting in it, has essentially disintegrated from being left outside. I think it would be pretty simple to 3d print a version as this isn’t a typical “replacement part”. It’s 11.25 in at the back, 12 in at the front, the buckle hole is 1.5 in wide by .5 in, 4.25 in from the front. The total thickness of the board is .5 in. As you can tell, there is some curvature to it as it is a seat and not totally flat. I’m not quite sure how to measure this, but that front outside corner is 1in from the table when the seat board is balanced.

This is my first time requesting anything so please let me know what other information may be needed. Thanks!

I would like to get my OPR Jackal army printed and would like to know places.