I bought a 3DO from ebay a couple years ago that wouldn't read discs (sold as is) and the first thing on my mind was to replace it with an ODE which was actually working great at first. Then one day, it just boot loops at the 3do logo. It shows the logo then stays at a black screen for 40 seconds till it restarts. I got my ODE from stoneagegamer.

I am going to Classic Game Fest in Austin Texas this Friday. Wanting to buy a 3DO console. What should I look for to get the best console. What would be the best game to buy.

Does anyone have any suggestions of what this may be are these easily fixable? Thanks in advance

Hello. There's a couple of games that I can't get running properly on the Opera Emulator (through RetroArch). Samurai Shodown doesn't load the backgrounds. For Wing Commander 3 the sound during cutscenes cuts out and doesn't come back. I tried sourcing different roms, and even tried the Japanese versions, but the results are still the same. The other games I've tried so far seem fine. Here's a video showing what I'm talking about: https://youtu.be/ndxD-FPrRO8

Does anyone know anything I can adjust in RetroArch to make the games run properly? Thanks.

Hooked up my FZ-10 today. I paid $120 for it at a flea market over the pandemic. I always wanted one as a kid, but of course, they were too expensive. Fun to experience now as a time capsule. Really, my favorite game is the hi-res version of Night Trap since I loved the lo-res SegaCD version as a kid

Hi everyone,

I am trying to find a schematic for a 20/24 MHz CPU overclock and CPU cooling mod for my 3DO.

I would like to use a glitch-free oscillator controlled by an Arduino. I'm currently looking at either using an Analog Devices LTC1799 with a digital pot, or a Silicon Labs Si5351A clock generator.

Has anyone done this kind of mod before? I would really appreciate any schematics, code, or advice so I can build this safely.

Like many of you, I still love my 3DO!

Kind regards

This is my second FZ-1, the one I bought as a laser donor. My first FZ-1 had a dead laser, so I picked this one up, moved its good laser into the first console, and was left with a donor that no longer had a working drive. Instead of leaving it as a parts husk, it now runs an ODE.

The board got a full recap first. The power-supply area had leaked and the through-holes were darkened and corroded, so I recapped it, reflowed the dull joints and cleaned it back to shiny. I also recapped the disc-drive PCB, fitted a new tray belt and 3D-printed a replacement for the broken laser-sled gear, all preservation work since the drive is retired anyway. Maybe some day a working laser can be found to put in it.

The ODE is TZMWX's open-source USBTO3DO-FZ1 (Raspberry Pi Pico based). I built two, one for each of my 3DOs, then reworked them into a final form with a full-size USB-A port in place of the Pico's micro-USB, so a flash drive plugs straight into the console. For storage I added Humble Bazooka's 3D-printed Mnemo bracket, which routes the microSD out to the AV-EXPANSION bay, so no more opening the case to change the card.

Shown here on a Sony PVM-6041Q running the ODE's game menu. If you have built a USBTO3DO or another 3DO ODE, how are you handling storage, a USB stick, an internal microSD, or an external bracket like this one?

Hey all! I’ve been trying to hunt down this hat for quite some time. I was wondering if anyone here has one that would be willing to sell?

Thanks!

So my disc tray had gotten stuck and wouldn’t fully shut but fixed itself after about five or so tries is this something I should worry about in the future becoming a big issue

I just bought a 3DO because I am fascinated by its unique library, so I am looking for a list of odd games that you can't find anywhere else. Exclusives, experimental games, FMV stuff, just about anything that screams 3DO.

So what are your favorite games of this kind? I'm not interested in arcade ports or in the most well known games, I want the more obscure stuff even if it's not high quality, as long as they are playable obviously. Games that have ports on other platforms are okay if the 3DO version has something unique to it. Cyberdillo and Dragon Tycoon Edge are two examples I found that immediately caught my attention and I'll definitely try.

Just got my ODE from Aliexpress and realized… the controller cable is too bloody short. Anyone had any luck with a specific cable from Aliexpress or the like that they can recommend? Seems like many cables for Genesis fits it you modify the molding a little, but that not all pins are connected on many cables (just the ones needed for Genesis controllers basically).

Bought this beauty on an auction for $100, box controller from the same guy for $20. It does not read the discs, but I think it was a steal anyway :) ODE already ordered, can't wait to play Road Rash and Battle Blues :D

Usual story with an FZ-1, but I just wanted to check if anyone more experienced had any other ideas as to what the problem might be before I write the laser off as dead and say it's ODE time.

Things I've checked:

• Wormgear cogs (not cracked, no broken teeth)
• Wormgear motor (spins when 3V is applied, spins laser rail)
• Spindle motor (again spins when 3V is applied)
• Cleaned laser lens with IPA
• Adequate lubrication on rails
• Laser stop switch is working, pressing it manually with multimeter probes attached shows continuity
• Majority of caps appear to have been replaced properly by previous owner with Nichicons (including disc drive board)

On boot, the laser starts moving backwards from the centre spindle in three movements, the laser moving up and down trying to focus all the way. It gets to around the middle portion of the rails and gives up, and the 'insert disc' screen appears. At no point does the spindle motor actually rotate.

When an audio CD is inserted, the behaviour is identical.

Replacement lasers are around the same price as an ODE from AliExpress, so if the laser really is dead, I'm not getting another.

Would it be theoretically feasible to make a I’ll be heavily butchered version of the original 5 nights at Freddy’s games?

Found a 3DO (in box) on a japanese site. It is gonna be a few weeks before it gets here. But I am totally new to the 3DO. My other consoles I've either got Everdrives for them - if cartridge, or ODE's if they have drives. But I try to get an ODE that preserves the drive so I can play from disks if/when I find ones I'd like. So I need some advice about what I'd like to get and/or do with it.

It is a japanese version of the FZ-1 with controller. Still in box and seller says it powers on and drive works but that's all. For the price I was okay with that much info. Here's my questions:

1. What is the recommended ODE for this system that allows me to still use the CD-ROM drive?

2. Do I send out for recapping/upgrades regardless? What are some recommended upgrades if I do? I cannot solder. So would need to go out for it all.

3. I've looked and people don't seem to have issues with running the 100v version on American systems, but longer term will this cause any problems and I should either have it adjusted or get a step down?

4. Looks like I can get a composite to HDMI video output or an S-Video to HDMI for it. What's recommendation? It will go into a 40 inch widescreen TV (no, I shall neither get a CRT nor change aspect ratio to 4:3. I am against both. Don't ask. Memories). This system has both the mode a/mode b switch on the back.

5. Anything else I need to know or get for this while I wait for it to arrive?

Thanks!

Hi everyone,

I recently purchased a very cheap fz-10 as my first 3DO, unfortunately it seems that the disc drive is not working, looking for a non-invasive ODE option, i came across the Xport, and was lucky enough to find a used unit on ebay, for a decent price!

I received it today and i'm trying to get it to work, with no luck :( It is also the first revision, with the 3d printed warped case and taped up connector.

So far, i can get into the menu, after opening/closing the lid after the initial boot, I have a pal console, so I also get overscan on the menu and it cuts the top off, but the issue i have is that I can't load any game, I tried different combination from different sources, mostly .iso or .iso+.cue, in Pal, Ntsc-j and Ntsc-u, but no luck, it gets stuck at the 3DO logo, without ever booting the game, I tried in this case again to open and close the lid, but nothing works, any suggestions?

P.S. I saw that Fixel was offering replacement cables for these initial units, I assume this is not the case anymore, is it?

P.S.2 What are the "menu" and "change" buttons for?

Thanks everyone, I can't wait to play with this!

I was always under the impression that the Game Guru disc was the only way to free up storage space on an FZ-1 model. Well I learned it can be done with the Sampler CD. Really helps with the new FZ-1 I recently purchased.