Haven't watched this Apple TV "making-of" doc, but I will now. Wondering if they were using the 67 for test shots or something. The frame is similar to IMAX.

Side note: every photo of a director has them pointing to something out of frame.

Hello everyone! I recently posted on this form that I had gotten my camera and I just developed and scan my first roll. Nothing crazy just wanted to run a roll of film through the camera to make sure that it was working! Anyway, here are some of the shots I think overall I lucked out on my eBay purchase! The last shot is light on the film that came from me. Unfortunately, I turned on the light a little too soon which was completely stupid on my end.

Just got my Pentax 6x7 MLU with a 105 f2.8 lens! I posted here and listened to you guys feedback. I’ll be posting photos from the rolls after I develop! Thank you guys again!

Pentax 67 with 105mm f2.4
Fresno, Ca

SOLD

Hello everyone, I’m having an issue with my Pentax ME. Everything works perfectly, except for occasional problems in automatic mode. When I press the shutter release several times quickly, the first shot in low light might have the correct slow shutter speed, but the next shot, with the same lighting, unexpectedly uses a very fast speed. Has anyone experienced this or have any idea what could be causing it?
I'd really appreciate any tips you might have. I'm keen to know if this is something I could fix myself – I'm not looking to spend a lot of money and I actually enjoy tinkering with these kinds of issues.
Let me know if you need any more Information thanks allready! :))

Next several scans from my Pentax67 and Ilford XP2 400

I hope you like them :-)

Hola everyone, I have recently purchased a Pentax Baby, and I have realized that I will need to improve my basic mephoto tripod equipment. After searching for a while a came to the budget setup: INNOREL RT80C Carbon Fiber + Benro GX35. Is there any recommendation for a solid tripod system that is between 150-200$. Are there any vintage solid options that I can buy second-hand and provide stable results at low speeds from 1/8s to 10mins?

I have just got new scans from my Pentax.

Fotos shoted with: SMC105/2.4, 45/4, 75/4.5, 165/2.8 on Kodak Ektar 100.

Camera + Prism TTL are after CLA and calibration by Peter Emanuel (asahiphoto.co.uk).

I am quite happy.

Hi everyone! I’m buying my first Pentax 67 and it is the non-MLU version but it comes with the 105F 2.8 lens and they’re going to give it to me for about $530. They said that it’s in service and tested and it’s in great condition. Do you think this is a good deal? I don’t really ever shoot on a tripod and I don’t shoot anything lower than 1/60 but I keep seeing stuff about not getting it and getting it so I’m just curious if you guys think it’s worth it? Please let me know! Thank you!

UPDATE:

I ended buying the MLU version with a metered prism. Body only for now but I’ll try to find a lens later. Thank you guys for your suggestions!

Hello, the ex counter are aways blinking at 25, if I put anew film it goes until the end of the film at no stop, when the film ends the camera stop rewind, no shutter released or working.

Poor man’s X-Pan achieved with a 3d printed adapter

I’ve been using this camera the past 6 years and while I haven’t changed the ISO much over that time, I know I have and it’s been easy and fine. I’m leaving for Iceland next Sunday and will be using ISO 200 film and I cannot get the ISO selection on my camera to move! I got it tuned up a couple months back and I haven’t had to change the ISO since then so I don’t know if it’s somehow because of the tune up.

Has anyone else had this weird issue?