Why is it vehemently switching up the source and target identifiers?

(zombie tifa is meant to bite aerith, i have gotten multiple renders where aerith tries to bite zombie tifa)

Main Prompt:
3::2girls::, side-by-side, adult,

-2::alternate costume, alternate clothing, naked, removed parts of costume, chibi, moe::, -1::big head::, -0.5::decomposed, overly big hands and arms::, -1::ahegao face, two sets of teeth, silly, vampire fangs, monstrous, fat::, -0.2:: decomposed stomach::, -0.01::barefoot, bare hands::, -1::offering hand to viewer, hand in front of mouth, arm down, missing headwear, leg up, child::, -0.5::bright colours, sad frowning angry, small body::, 0.01::swimsuit, headwear, hat, feet, gloves, tights::, -1::ooze::, 1.4::adult body and face proportions::, 2::2000s anime, cemetery::,

-0.9::short height, stubby, big head::,

-1::slit cheeks on face and smiling skull face, wide mouth, oversized mouth::,

-1::off balance, clenched fists, joined hands, hands behind back, crossed arms, hands above head::

Main UC:
1girl, solo, alone, Alternate outfit, legs close together, 1.5::upright::, 3::a-pose, bad arm proportions, bad hand proportions, disproportionate head to body ratio, oversized head, ai generated look, small arms::,1::folded arms, [big eyes]::, stitches, from above, from below, -3:: crooked pose, sulk, creepy pose, walking like a zombie, zombie facial expressions::, -3::adult proportions and height::,

2::Hands holding clothing, hands behind back , arms down, hands holding thighs, smiling, grinning, fidgeting, eyes, shy, timid::

2::low quality or low resolution, bad quality, text, anatomy or rendering errors::, 1::upscaled, blurry::

0.2::open mouth with fully closed eyes, one leg behind the other::,

2::chibi, child, moe::, [big eyes, large head], frown,

5::polydactyly, bad quality, bad anatomy, big head, low detail face, low detail skin, hands behind back::

missing hands, more than five fingers, large hands

4::polydactyly, three legs::, 1::low detail character::, crying, sad, hands close, naked hand holding arm

Character 1 Prompt:
zombie girl, neck bite, source#biting neck

adult tifa lockhart, 2.6::turned completely into a green zombie skin and body::, 1.2::dirty and scuffed, lifeless, salivating with broken teeth and messed up hair, black spots on cheeks::, 1.4::loose head and hands, tilting body::, 2::deformed skeletal face and nose:: 1.5::sunken [[skeletal]] cheeks and limbs, ugly [[wilted]] crooked inhuman::, 1::necrotic putrefied::, 3::green glowing empty eye sockets, both sockets glowing shrivelled with one half-closed::, 2.5::black bags under [[eyes]]::,

Character 1 UC: 3::not biting, biting self::

Character 2 Prompt:
girl, adult aerith gainsborough, neck bite, target#biting neck

Character 2 UC: 3::biting self::

Does anyone make any inflatable artworks using Ai from Novel Ai?

Hey there!

I've been working on a NovelAI-compatible toolkit over the last few days. It started with me messing around with Tampermonkey and somehow turned into an 11,000+ line toolkit connecting NovelAI, Danbooru, Gelbooru and e621 through one local tag and image library.

The main focus is making Booru posts easier to collect, organize and reuse for prompting.

Main features:

• Import categorized tags and post metadata from Danbooru, Gelbooru and e621
• Batch-import multiple posts directly from listing pages
• Choose which tag categories should be imported or included in copy actions
• Store local image previews inside Tampermonkey
• Group related images together as variants
• Compare variants side by side or with an overlay
• Search an indexed collection of all saved tags
• Organize entries with manual folders and rule-based Smart Collections
• Detect duplicate sources and visually similar images
• Export and import the complete library as JSON

On NovelAI, the toolkit mainly works as the destination for saved content. Tags, character profiles, tag sets, base tags and complete prompt setups can be inserted directly into the Main Prompt, Undesired Content and character fields.

Everything is stored locally inside Tampermonkey. The toolkit does not collect account credentials, cookies or NovelAI authentication data, and it tries to avoid unnecessary background requests.

You can find the source code, installation instructions and full feature list here:

https://github.com/Ainz-sama120/Ainz-Unofficial-NAI-Toolkit

I originally built it for my own workflow, but it became useful enough that I thought other NovelAI users might get some value out of it too.

Note that it was only tested using V4.5 Full!

This is the first public release, so feedback and bug reports are very welcome.

For 4.5

Adjust UC as needed. And post what you make!

1.10::1 girl, Photo (medium)::, realistic depiction of (character), natural light makeup, realistic proportions, photographic realism, professional studio portrait, detailed face, detailed background, natural symmetry, cinematic lighting, soft diffused catchlight, realistic human skin texture, visible pores, micro skin details, fine peach fuzz, subtle skin imperfections, natural oil sheen, subsurface scattering, sharp focus on skin, Canon EOS R5, 85mm f/1.2, accurate human anatomy, natural face structure, subtle asymmetry, soft natural lighting, shallow depth of field, natural skin texture, realistic pores, natural eye size, soft eyelashes, human proportions, real-life color grading, portrait photography, Looking at viewer, very aesthetic, masterpiece, no text

I can’t contain my excitement at all man. I’m thinking maybe around August?

I prefer conventional Western style toony furry art. When I put kemono in the undesired content field, it seems to have no effect, even if I add curly brackets. Some tips for specifically tuning the output away from kemono while staying toony (don't want realistic!) would be sooooo appreciated.

Hi, I have been an Opus tier subscriber to NovelAI for several months, and so far I'm impressed.

About me: before AI took off, I was already a prolific short story writer with my pen name published all over the internet. I would say I wrote about 600,000 words across a 70+ books by hand, and I'm quite proud of the catalog I built and the fans I have found. This year I got the idea of looking for a LLM that could digest my catalog to help me write sequels and remasters in my same style without a response that says, "I can't generate that type of (NSFW) content."

The experience so far: NovelAI does like 75% of the work. The other 25% is spent trying to steer it back on point and reminding it that it is forgetting instructions I have mentioned multiple times (frustrating). Where once it took me a month to write 10,000 words, I can now do it in about a week. Now, I spend most of my time editing rather than writing.

Lessons learned: 1) Story outlines are incredibly effective at helping NovelAI draft my long and often 10,000+ word long stories. Giving NovelAI an entire story and prompting it with, "write a sequel" often goes poorly. 2) Also, I learned that having a "style guide" is really useful for teaching the "voice" of my pen name that my readers expect to see in my work. 3) I'm not sure if I'm using the Lorebook wrong, but maybe less is more because whenever I give characters, themes, and settings detailed descriptions, NovelAI writes more "generally" rather than specifically, almost like it's trying to water down the world I'm building with useless words. Now, I never use it.

That being said, I'm wondering if there are any writers out there, new and old, who have learned certain tips and tricks when using NovelAI that they would like to share?

With GLM I just used instruct or put plot points in author’s note and it worked fine. With Xialong nothing seems to work right. How to make it move the plot in direction I want it to go?

I imagine this may get deleted because of the rule not to post about customer support, but I wanted to flag that, for anyone currently having issues, they (mod Luna from Discord) just identified global payment issues.

So it isn't just you, and hopefully they can get it fixed soon. They may create a pinned post here about it soon, but yeah.

I have an image that I generated months ago and then I realized that I absolutely forgot what image I used for vibe transfer. I know I can use vibe transfer in the image and generate more, but was wondering if there is any way to figure out what image I used.

Could we move the Save button to the right and place the Seed button somewhere else, at least on mobile? I keep accidentally pressing the Seed button, and it's becoming frustrating to have to clear the seed every time.

That is all. Thank you.

This is a guide that summarizes the know-how of V4 and V4.5 of a significant number of Korean users, not everyone. It supports English, Japanese, and Korean. I will update it again when I accumulate information after a big update. Please pay a lot of attention. :D

Ok I’m going into limb on the new diffusion is this let’s say if anlatan announces the v5 soon Imagine they think beyond danbooru along with e621 and maybe gelbooru (maybe they learned it from that site despite it is similar to danbooru I’m not sure on that) they learned from with the previous diffusion like v2, v3, v4, & v4.5 I imagine they say we are learning data from r34 mainly the digital hand drawn artist and some tags degree the tags that are not available on danbooru, e621, and maybe gelbooru as far as it’s not the ai artists to learn from that r on that website that’s what I could have imagined maybe but we’ll see

Since I saw the new V5 imagegen is on the horizon, I thought I'd make a suggestion I've had in mind for a while: remove the cap of 6 characters and allow users to add as many characters as they want.

Yes, at some point the model will not show all the characters and get confused, but not everyone uses characters in this way.

I usually use the six character slots to “hold” my prompts, which I shift between (ticking on and ticking off as I go). In other words, I am using it like a “save prompt” function. I find this more efficient than having to copy and paste my prompts from a separate tab all the time.

When used in this manner, there is no reason (I think) to limit the number of characters one should be able to add. Just clarify to users that if they try to put more than six characters in an image, it will not work.

When it comes to closely replicating a specific style, do you notice much of a difference between the two?

I know that the artist tag placed first tends to have a stronger influence, but I have always found the practical implications of this somewhat vague.

Recently, I came across the following advice:

“This is the artist tag order I recommend:

• Beginning: artists who are good at anatomy, body types, or composition.

If you only generate one particular body type, this may not matter much. However, if you want more variety, use an artist who draws a wide range of body types. You could try Bbi-sensei or look through other recommendation posts.

• Middle: artists whose coloring or overall atmosphere you like.

This includes artists whose rendering of skin texture, backgrounds, character appearances, or general mood appeals to you. That said, you can also be fairly loose with this section.

• End: artists who draw attractive eyes or fine details.

Eyes are one of the areas where AI-generated images can look especially obvious, and they have a major influence on a character’s overall impression. You will probably need to experiment and adjust this part yourself.”

What do you think of this advice? Does the position of an artist tag actually influence different aspects of the result in this way, or is this more of a convenient rule of thumb than something consistent?