One of four recordings from today's chill session!

Like the title says, how do you store your flutes? Currently most of mine are stored wrapped and in the bottom drawer of my dresser. However the Anasazi flutes are too long and would like to hear or see how your all are storing your flutes.

Good day! I was hoping to get a quick advice on what flute actually matching what I have in mind and how realistically I can learn it 😅

I play piano at intermediate level but I always liked to play harmony Flute(not too sharp pitch) on 432htz tunning. I am going to start learning it from YouTube. ​ I love to play last mohican etc from online list of guidance I did find below features most fitting but still I am not sure.

Middle (such as the Love Flute range and most of the Harmony Flutes)

F# minor

HARD WOOD

Thanks for your input!

Hello! I'm new to the native american flute, I've got a 6 hole flute in the key of D (doesn't specify major or minor), and I'm having trouble. Firstly it seems so much higher in pitch than any i've ever heard, but that could be the key it's in. And then, it had a clear sound with all holes covered, but starting to uncover them just sounds terrible after the bottom hole... and playing it at the top of the scale, with all holes uncovered it sounds super high pitched and not smooth at all... I covered the 3rd hole down as was suggested, and I'm fairly confident things aren't being covered weirdly, especially because when I have all of my fingers off of the holes, I see videos of it sounding clear and nice, but mine is very... not like that haha. Any suggestions?

Triple Drone in Dm by Dustin @ Elemental Flutes. I did the wood burning, super happy with the result. This flute sounds and looks fantastic! I think I will need to burn more flutes in the future.

I was practicing my flute and walking my dog while waiting for my semi truck to get unloaded. I randomly decided to play along with the backup beeper of one of the trucks and found this little tune.

Sorry for the squeakiness on some of the low notes, I’m still getting used to my new flute by u/Spaced_In

My newest totem - Spirit of the White Buffalo

Fell in love with the sound of the drones in f# any recommended flutes to look at

So i'm making a flute out of bamboo but it makes this weird harmonic sound and i don't know why. I tried to work a lot on the air and sound holes and also the track, but nothing changed. Before the video i made, the track was more shallow, the holes were smaller, i tried to sharpen the splitting edge or to make it more blunt, still same sound. My thoughts on this are that the last part of the flute (the furthest from the mouth piece) is a little bent and it changes a little in diameter so that creates many harmonics and maybe turbolence.. i don't know. What do you think? Thanx

I started off with a drone flute and it came out sufficiently good, so i tried to make a triple flute. How does it sound and look to you?

I had to make a lot of holes and to cover the bottom of flute to tune them, i have to learn how to tune it without doing all this fixing, but it also makes it look original in the end because of all the fixings i made.

My newest flute design featuring my new totem. This is my White Buffalo or Tȟatȟáŋka Ská flute. In the key of F#.

Morning practice with my cat

This is one of a handful of clips I got, I shared two previous ones but don't want to keep spamming this place!

It's been one year since I came here asking for flute recommendations. I've mainly been focusing on the major scale and basic techniques. It's my favorite instrument. But I still have a lot of work to do.

This is my attempt at jamming with Herbie Hancock's Watermelon Man. I'm going to do a new version every year.

This mis 1 of 4 clips I got from my escape to a local woods area

Since I've made quite a few flutes now I know the rough idea of where the finger holes should go depending on the size of the flute and then I tune according to whatever the root pitch of the flute is (if I want it to be in 440hz tuning then I trim the bottom of the flute till its in standard pitch but I usually like to go with tuning the flute to itself.)

​

My main question is: since the finger holes can have a range of placements and still be in tune (depending on the size of the hole) is there optimal placements for getting the best tone/playability or does it not really matter? For example, slightly smaller holes that are higher up on the flute vs larger holes that would be placed lower down.

​

I noticed that if you put the top holes too close to the sound hole, then the high notes just overblow without any way to correct. So I try to make sure the holes always start a decent enough distance away from the TSH.

​

Is my method of doing it this way ok? It seems to give better results than trying to use the NAflutomat thing since every time I've used that I've either needed to do a lot more adjusting, or the flute just gets ruined.

​

Also what methods do you use for finger hole placement?

​

Thank you for any responses.

​

Greetings from Croatia! I just made me a Native American style flute walking stick. It's 135cm tall and plays in E. I was going for traditionally tuned but it turned out to be almost perfectly in E. All hand carved, sanded, zero power tools used (except laser engraved leather patch). It says "Below the Woods" on the patch- it roughly translates to my villages name. Home raised turkey feather for sam extra country flare 😁

Those 3D-printed flutes are really impressive; they sound absolutely great and look beautiful!