Hi.

So i succesfully got a working finherprint scanner on ubuntu with open fprintd, but with debian 13, i can't do it. Somebody please help me how to make it work.

Hello everyone,

So I'm trying to install and setup sway from a clean, net install. I know I could just install the default DE and install sway alongside it, but I'm in my no-bloat phase.

Anyway, I'm starting from the Debian 13.6 iso, and choosing no DE when installing (so no GNOME nor "Debian Desktop Environment" when I got the choice).

When launching it all, I install sway, swayidle, swaylock and sway-backgrounds on the sway side. As for the DM, I went for greetd and wlgreet (it seems to me that this is where things don't work) or gtkgreet (I tried too but it doesn't work either). I also install a few other things, but those are uninportant here (unless stuff like git, brightnessctl, build-essential or make are known to conflict with something but then I'll be damned)

After that, I'm following the archwiki guide for greetd to set things up. So that include the systemctl enable greetd.service, configuring /etc/greetd/config.toml, sway-config, wlgreet.toml, and even the start-sway script for XDG_CURRENT_DESKTOP. I've checked many times (due to me reinstalling Debian many times haha) and I haven't made mistakes reproducing the instructions.

Still, when I reboot, I get a XDG_CURRENT_DESKTOP error, and some kind of failed to flush wayland socket: something something broken pipe piperoken pipeol error (cannot remember the exact wording for the second part of the message but you have the pipe-based keywords) which I don't understand.

So, I'm a bit lost here. I suppose there is a problem with greetd, but since the command in config.toml starts with sway, maybe it's a sway problem ? What am I doing wrong ?

Thanks in advance for your replies.

guys have you ever wondered what ita possible to do before apt upddate && apt upgrade

Hi. I download today the latest iso (13.6) to doing some server installations and "Software Selection" is missing and install always X, am i missing something?

Hello, yesterday I installed window maker on debian, my keyboard layout on tty is French but it's not the case on wmaker and I want it to be French but I don't know how.

Thanks.

Hello, excuse me, how to fix the internal microphone feeling like it's bouncing or repeating the words I say when I'm having a meeting with Google Meet? Well, I've read and searched the internet and it's recommended to use EasyEffect and use effect Deep Noise Remover, but it has a latency or delay of about 1 second or more . Is there a solution and suggestion? I use Pipewire.

https://reddit.com/link/1v3f8l4/video/m29yyjq72seh1/player

https://reddit.com/link/1v3f8l4/video/fkqgsjq72seh1/player

Achei o GNOME no Debian bem mais fluido que em outras distribuições. Também sentiram isso? Eu realmente estou surpreso com a fluidez e velocidade do Debian e GNOME. Programas abrem rápido, as animações não travam e o desempenho é muito bom. Achei funciona melhor que o Fedora e Ubuntu

I need to run a Debian computer with GUI and a fullscreen application, but without connected mouse and keyboard. The issue is that when the computer starts, the lower icon bar is visible and the desktop window is smaller - when I remotely run the fullscreen app, it still fits in that smaller window, with the icon bar visible. How can I start with the desktop maximized?

-Last Update: Okay so I gave up, this issue has taken days off my life and I am just going to stop now. Was the HDD healthy? I have no idea powershell said it was, it showed up in the BIOS, but both windows and linux had trouble detecting it. Maybe it was the laptop but then again there is confusion. Thank you all for your help.

So straight to the point, I installed a 4tb sata hdd (2.5) into my Dell Inspiron n5110 and the BIOS says it is there and all. But when I booted into debian using a live installation on a usb drive and did lsblk in terminal it does not detect my hdd.

Also if this helps I have seen the message "revalidation failed errno=-2"and also I tried doing the "libata.force=noncq,1.5Gbps" thing and it still does not show up.

Please help I am new to linux.

(as the title says I did change from ATA to ACHI still does not work)

-Update: I am slowly going insane, I decided to go through the lengthy process of removing the HDD and using it as an external one with my actual PC, (sata to USB) powershell says the disk is healthy but now whenever I try to initialize the disk in diskmanager it says there is an i/o problem. Oh my god.

I want my system to check for updates once a week. I am on stable branch, so believe it should be enough, even for security updates. Correct?

Is there a config file for this?

Hello all,

TL:DR - I want to install a specific version of the QGIS package but don't know how to proceed.

I had the latest QGIS installed on my system (Debian 13 Trixie) which was 4.2 but I cannot use it because it is not compatible with what we have at work. Since I don't need the latest, I wanted to install LTR(Long Term Release) which is version 3.44.12.(atm). Any pre 4.0 version is fine by me.

I found how to install QGIS here https://www.qgis.org/resources/installation-guide/#repositories I also found the right package here: https://qgis.org/ro/linux-packages/debian-ubuntu-ltr/#dists/trixie (not sure why is it in Romanian, but ok) but I don't know what to do with the latter. Since I'm fairly new to Linux, can someone explain this format or link a resource I can read myself?

I tried to be smart and use terminal by modifying

sudo apt install qgis qgis-plugin-grass

to:

sudo apt install qgis=1:3.44.1+18trixie-1 qgis-plugin-grass=1:3.44.1+18trixie-1

But that led me to dependency nightmare as each time I add a dependency another one would pop up. After 5, I just gave up. Besides, I wasn't sure which version I was installing.

Also, is there a value I can enter in /etc/apt/sources.list.d/qgis.sources to force the update to update only to LTR?

I have a feeling I was close to installing it, but honestly, I have no clue.

I appreciate any help provided. TIA.

P.S.: I was looking into keeping the latest version of QGIS and build a version that I need here: https://github.com/qgis/QGIS/blob/master/INSTALL.md#310-building-debian-packages This way I can have compatibility and new features, but I don't have time for that atm.

Besides the stability, people often forget to mention the supportive and friendly community.

If you have a problem, you will be asked for more details. Run xyz command to get it. There is always someone that know the solution.

The Debian community is what I like the most. No BS; just dry facts :)

Hi all, i'm lost noob, nothing makes sense for me rn with debian and propietary driver. So, from installation - Debian stable kde with 6.12.94 kernel installed at first from live boot, updates, added some essentials for me, also contrib, non-free and installed timeshift. Okay, stuff works, snapshot created, update 2 and got 6.12.95, snapshot created reboot. On 6.12.95, nstallation of nvidia drivers from nvidia docs official guideline, (i updated initramfs for newer kernel). Reboot, got working nvidia drivers, so snapshot created, installing rest of stuff for me, almost all from discover, outside of steam - for it added i386 architecture, updated, intalling steam from apt - got prompted to install 32bit nvidia drivers and stuff so i installed, got it working so reboot, snapsot and this time after update (got 7.02.13 i think) i installed 7 days to die, played it (it worked under nvidia drivers), closed pc (wouldn't shut down so forced shutdown), and today after boot black screen - no login screen, no nothing. So i again updated initramfs, worked with a clanker a bit to fix it, didn't worked, so rolled snapshot back to before installing game - and you wouldn't guess, still black screen. I can reboot to 6.12.94 and have stuff working on noveau driver, but not on nvidia. What gives? Wtf?! Why on snapshots that it would boot and work correctly with nvidia driver is now acting in this way? And even going back with snapshots doesn't seem to work, to ones created when driver worked? What can i do? It's like 6 attempt, 6 reinstall of debian. As for timeshift, installed from discover, and clicked okay okay okay end. Just default config.

Its not the error itself bothering me (backup NAS is not present at the moment and im guessing those error messages are telling me that).

Problem is that i can not use CLI cause those texts override everything including Nano and Midnight commander.

Any fix for that?

Hello, beginner here. I installed Debian stable with Gnome and today is saw this security checks failed. Is it malware or did i do something wrong?

All i did after installation was following this guide from NVIDIA itself to install drivers: https://developer.nvidia.com/cuda-downloads?target_os=Linux&target_arch=x86_64&Distribution=Debian&target_version=13&target_type=deb_network

Did i broke the system with these drivers and should i have kept the default ones? Help needed because i am worried.